No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwQinQSubIfVlanStackingTable

hwQinQSubIfVlanStackingTable

This table is used to create or delete a stacking setting on a sub-interface.

The index of this table is hwQinQSubIfStackingIfIndex.hwQinQSubIfStackingCEVlanStart.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.116.2.2.1.1

hwQinQSubIfStackingIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of the VLAN stacking sub-interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.2.1.2

hwQinQSubIfStackingCEVlanStart

VlanId

Not-accessible

This object indicates the start VID of CE VLANs permitted by the VLAN stacking sub-interface.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.2.1.3

hwQinQSubIfStackingCEVlanEnd

VlanId

Read-create

This object indicates the end VID of CE VLANs permitted by the VLAN stacking sub-interface.

Currently, the value range of 1 to 4094 is supported.

1.3.6.1.4.1.2011.5.25.116.2.2.1.5

hwQinQSubIfStackingRowStatus

RowStatus

Read-create

This object indicates the row status:

  • 1: active
  • 2: notInService
  • 3: notReady
  • 4: createAndGo
  • 5: createAndWait
  • 6: destroy

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.116.2.2.1.6

hwQinQSubIfStackingPEVlan

Integer (0..4094)

Read-create

The value of this object identifies the VLAN ID of PE VLANs permitted by the VLAN stacking sub-interface.

Currently, the value range of 1 to 4094 is supported.

Creation Restriction

  • A maximum of 16 ranges can be configured.

  • CE VLAN IDs on a sub-interface cannot overlap.

For example, if the value of hwQinQSubIfStackingCEVlanStart is set to 500 and the value of hwQinQSubIfStackingCEVlanEnd is set to 600, the value of hwQinQSubIfStackingCEVlanStart cannot be set to 300 and the value of hwQinQSubIfStackingCEVlanEnd cannot be set to 600. This is because overlapping exists between 300 to 500.

  • A sub-interface can be enabled with one of the three functions, that is, dot1q, QinQ, and VLAN stacking.

For example, if hwQinQSubIfTermTable is created, hwQinQSubIfVlanStackingTable and the VLAN dot1q configuration cannot be created.

  • The setting of hwQinQSubIfVlanStackingCEVlan cannot overlap the setting of hwQinQSubIfTermPEVlan in hwQinQSubIfTermTable.

  • Similarly, the setting of hwQinQSubIfVlanStackingCEVlan cannot overlap the setting of VLAN ID in the VLAN Type field.

  • If only one inner tag of VLAN stacking is set, the values of hwQinQSubIfTStackingCEVlanStart and hwQinQSubIfStackingCEVlanEnd must be the same.

  • The VLAN IDs permitted by the VLAN stacking sub-interface must be different from the configuration on the QinQ termination sub-interface.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142096

Views: 160384

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next