No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmpNotifyFilterTable

snmpNotifyFilterTable

This is the table of filter profiles. Filter profiles are used to determine whether particular management targets should receive particular notifications. When a notification is generated, it must be compared with the filters associated with each management target which is configured to receive notifications, in order to determine whether it may be sent to each such management target.

The indexes of this table are snmpNotifyFilterProfileName and snmpNotifyFilterSubtree.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.6.3.13.1.3.1.1

snmpNotifyFilterSubtree

OBJECT IDENTIFIER

Not-accessible

The MIB subtree which, when combined with the corresponding instance of snmpNotifyFilterMask, defines a family of subtrees which are included in or excluded from the filter profile.

Currently, the maximum access is read-only.

1.3.6.1.6.3.13.1.3.1.2

snmpNotifyFilterMask

OCTET STRING

Read-create

The bit mask which, in combination with the corresponding instance of snmpNotifyFilterSubtree, defines a family of subtrees which are included in or excluded from the filter profile.

Each bit of this bit mask corresponds to a sub-identifier of snmpNotifyFilterSubtree, with the most significant bit of the i-th octet of this octet string value (extended if necessary, see below) corresponding to the (8*i - 7)-th sub-identifier, and the least significant bit of the i-th octet of this octet string corresponding to the (8*i)-th sub-identifier, where i is in the range 1 through 16.

Each bit of this bit mask specifies whether or not the corresponding sub-identifiers must match when determining if an OBJECT IDENTIFIER matches this family of filter subtrees; a '1' indicates that an exact match must occur; a '0' indicates 'wild card', that is, any sub-identifier value matches.

Therefore, the OBJECT IDENTIFIER X of an object instance is contained in a family of filter subtrees if, for each sub-identifier of the value of snmpNotifyFilterSubtree, either:

the i-th bit of snmpNotifyFilterMask is 0, or the i-th sub-identifier of X is equal to the i-th sub-identifier of the value of snmpNotifyFilterSubtree.

If the value of this bit mask is M bits long and there are more than M sub-identifiers in the corresponding instance of snmpNotifyFilterSubtree, then the bit mask is extended with 1's to be the required length.

Note that when the value of this object is the zero-length string, this extension rule results in a mask of all-1's being used (that is, no 'wild card'), and the family of filter subtrees is the one subtree uniquely identified by the corresponding instance of snmpNotifyFilterSubtree.

Currently, the maximum access is read-only.

1.3.6.1.6.3.13.1.3.1.3

snmpNotifyFilterType

INTEGER {included(1), excluded(2)}

Read-create

This object indicates whether the family of filter subtrees defined by this entry is included in or excluded from a filter.

Currently, the maximum access is read-only.

1.3.6.1.6.3.13.1.3.1.4

snmpNotifyFilterStorageType

StorageType

Read-create

The storage type for this conceptual row. Conceptual rows having the value "permanent" need not allow write-access to any columnar objects in the row.

Currently, the maximum access is read-only.

1.3.6.1.6.3.13.1.3.1.5

snmpNotifyFilterRowStatus

RowStatus

Read-create

The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4)or createAndWait(5).

Currently, the maximum access is read-only.

Creation Restriction

The entries in this table can be created.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142096

Views: 160636

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next