No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rip2IfConfTable

rip2IfConfTable

Objects in this table have values when an interface is enabled with RIP. If the configuration information of the interface is updated, the corresponding value in the table changes.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.23.3.1.1

rip2IfConfAddress

IpAddress

Read-only

The IP Address of this system on the indicated subnet. For unnumbered interfaces, the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.23.3.1.2

rip2IfConfDomain

RouteTag

Read-create

Value inserted into the Routing Domain field of all RIP packets sent on this interface.

By default, the value is 0000.

Currently, the maximum access is read-only.

1.3.6.1.2.1.23.3.1.3

rip2IfConfAuthType

Integer{noAuthentication (1),simplePassword (2),md5 (3)}

Read-create

The type of Authentication used on this interface.

The default value is noAuthentication.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.23.3.1.4

rip2IfConfAuthKey

OCTET STRING(size(0~16))

Read-create

This object indicates the authentication key. A modification of the corresponding instance of rip2IfConfAuthType does not modify the rip2IfConfAuthKey value. If a string shorter than 16 octets is supplied, it will be left-justified and padded to 16 octets, on the right, with nulls (0x00).

When read, rip2IfConfAuthKey always returns an octet string of length zero.

1.3.6.1.2.1.23.3.1.5

rip2IfConfSend

INTEGER{doNotSend (1),ripVersion1 (2),rip1Compatible (3),ripVersion2 (4),ripV1Demand (5),ripV2Demand (6)}

Read-create

The value of this object identifies the version of the RIP packets to be sent on this interface.
  • doNotSend implies RIP updates are not sent.
  • ripVersion1 implies sending RIP updates compliant with RFC 1058.
  • rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules.
  • ripVersion2 implies multicasting RIP-2 updates.
  • ripV1Demand indicates the use of Demand RIP on a WAN interface under RIP Version 1 rules.
  • ripV2Demand indicates the use of Demand RIP on a WAN interface under Version 2 rules.

ripV1Demand and ripV2Demand were not supported in current version.

1.3.6.1.2.1.23.3.1.6

rip2IfConfReceive

INTEGER{rip1 (1),rip2 (2),rip1OrRip2 (3),doNotRecieve (4)}

Read-create

This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.23.3.1.7

rip2IfConfDefaultMetric

INTEGER (0..15)

Read-create

This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a default route via another device may be propagated.

Currently, the maximum access is read-only.

1.3.6.1.2.1.23.3.1.8

rip2IfConfStatus

RowStatus

Read-create

This object indicates whether the interface performs the receiving and sending of RIP packets.

Currently, the maximum access is read-only.

1.3.6.1.2.1.23.3.1.9

rip2IfConfSrcAddress

IpAddress

Read-create

The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2IfConfAddress. On unnumbered interfaces, it must be the value of rip2IfConfAddress for some interface on the system.

Currently, the maximum access is read-only.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be created.

Deletion Restriction

This table cannot be deleted.

Access Restriction

Before reading this MIB table, run the rip mib-binding process-id command to bind the RIP process to SNMP.

Objects in this table have values only when the interface is enabled with RIP.

The value of object rip2IfConfDomain is always 0000 because RIP2 packets do not use this region.

The values of objects rip2IfConfAuthType, rip2IfConfAuthKey, rip2IfConfSend, rip2IfConfReceive, rip2IfConfDefaultMetric all depends on the configuration of command lines. Each one has different value range.

For the object rip2IfConfSrcAddress, if the interface is configured with address, the value of this object is the same as that of the object rip2IfConfAddress, that is, the address configured on the interface.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142096

Views: 115266

Downloads: 75

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next