No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwL2mcCfgTable

hwL2mcCfgTable

This table describes the IGMP snooping configurations in a VLAN or a VSI.

The indexes of this table are hwL2mcVlanIndex and hwL2mcVsiName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.1

hwL2mcVlanIndex

VlanIdOrAny

Not-accessible

This object indicates a VLAN ID. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.2

hwL2mcVsiName

DisplayString

Not-accessible

This object indicates a VSI name. If a VLAN is specified, the value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.3

hwL2mcEnabled

EnableStatus

Read-create

This object indicates whether IGMP snooping is enabled in a VLAN or a VSI. By default, IGMP snooping is disabled in a VLAN or VSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.4

hwL2mcRouterAgingTime

Integer32

Read-create

This object indicates the aging time of a router interface. The value ranges from 1 to 1000, in seconds. By default, the aging time of router interfaces that a device learns from IGMP Query messages is 180 seconds, and the aging time of router interfaces that the switch learns from PIM Hello messages is the Holdtime value in PIM Hello packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.5

hwL2mcMaxQueryRespTime

Integer32

Read-create

This object indicates the maximum response time for Query messages. The value ranges from 1 to 25, in seconds. The default value is 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.6

hwL2mcLastMemQueryInterval

Integer32

Read-create

This object indicates the last member query interval. The value ranges from 1 to 5, in seconds. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.7

hwL2mcQueryInterval

Integer32

Read-create

This object indicates the general query interval. The value ranges from 1 to 65535, in seconds. The default value is 60.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.8

hwL2mcRobustCount

Integer32

Read-create

This object indicates the robustness variable. The value ranges from 2 to 5. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.9

hwL2mcCheckRouterAlert

TruthValue

Read-create

This object indicates whether to check the router-alert option in packets. The default value is False, indicating that the switch does not check the router-alert option.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.10

hwL2mcSendRouterAlert

TruthValue

Read-create

This object indicates whether to send packets with the router-alert option. The default value is True, indicating that the switch sends packets with the router-alert option.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.11

hwL2mcIgmpVersion

Integer32

Read-create

This object indicates the version of the IGMP packets. The value ranges from 1 to 3. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.12

hwL2mcFwdMode

Integer32

Read-create

This object indicates the forwarding mode for multicast packets. The value can be:
  • 1: IP address-based forwarding
  • 2: MAC address-based forwarding
The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.13

hwL2mcPromptLeaveEnable

EnableStatus

Read-create

This object indicates whether prompt leave is enabled in a VLAN. By default, prompt leave is disabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.14

hwL2mcPromptLeaveAclNum

Integer32

Read-create

This object indicates the number of the ACL that specifies the prompt leave conditions. The value ranges from 2000 to 3999. The default value is 0, indicating that no ACL is configured for prompt leave.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.15

hwL2mcRouterPortLearningEnable

EnableStatus

Read-create

This object indicates whether router interface learning is enabled in a VLAN. By default, router interface learning is enabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.16

hwL2mcReportSuppressEnable

EnableStatus

Read-create

This object indicates whether IGMP Report message suppression is enabled in a VLAN. By default, this function is enabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.17

hwL2mcIgmpQuerierEnable

EnableStatus

Read-create

This object indicates whether the querier function is enabled in a VLAN. By default, this function is disabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.18

hwL2mcIgmpSsmMappingEnable

EnableStatus

Read-create

This object indicates whether SSM mapping is enabled in a VLAN. By default, SSM mapping is disabled in a VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.19

hwL2mcSsmAclNum

Integer32

Read-create

This object indicates the number of the ACL that specifies the SSM mapping policy. The value ranges from 2000 to 2999. The default value is 0, indicating that no ACL is configured for SSM mapping.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.181.1.2.1.1.100

hwL2mcRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table.

Modification Restriction

The specified VLAN must exist.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The specified VLAN must exist.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 174384

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next