No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nqaJitterStatsTable

nqaJitterStatsTable

This table is used to test network status by sending packets. By taking multiple statistics, it calculates the jitter value of network time delay.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, and nqaJitterStatsIndex. Among the three indexes, the former two indexes are external indexes.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.3.1.1

nqaJitterStatsIndex

Integer32 (0..'7FFFFFFF'h)

Not-accessible

This object indicates the index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.2

nqaJitterStatsCompletions

INTEGER

  • noResult(0)
  • success(1)
  • failure(2)
  • negotiateFailed(3)

Read-only

This object indicates the operating status of a test instance. If the test is still running, the value will be noResult (0).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.3

nqaJitterStatsRTDOverThresholds

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed but exceeds the RTD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.4

nqaJitterStatsNumOfRTT

Counter32

Read-only

This object indicates the number of times when a response is received and the RTT is successfully calculated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.5

nqaJitterStatsRTTSum

Counter32

Read-only

This object indicates the sum of RTT of all the received packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.6

nqaJitterStatsRTTSum2Low

Counter32

Read-only

This object indicates the low 32-bit of the RTT square sum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.7

nqaJitterStatsRTTSum2High

Counter32

Read-only

This object indicates the high 32-bit of the RTT square sum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.8

nqaJitterStatsRTTMin

Gauge32

Read-only

This object indicates the minimum RTT value of the packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.9

nqaJitterStatsRTTMax

Gauge32

Read-only

This object indicates the maximum RTT value of the packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.10

nqaJitterStatsMinOfPositivesSD

Gauge32

Read-only

This object indicates the minimum positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.11

nqaJitterStatsMaxOfPositivesSD

Gauge32

Read-only

This object indicates the maximum positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.12

nqaJitterStatsNumOfPositivesSD

Counter32

Read-only

This object indicates the number of positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.13

nqaJitterStatsSumOfPositivesSD

Counter32

Read-only

This object indicates the sum of positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.14

nqaJitterStatsSum2OfPositivesSDLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.15

nqaJitterStatsSum2OfPositivesSDHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.16

nqaJitterStatsMinOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.17

nqaJitterStatsMaxOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.18

nqaJitterStatsNumOfNegativesSD

Counter32

Read-only

This object indicates the number of negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.19

nqaJitterStatsSumOfNegativesSD

Counter32

Read-only

This object indicates the absolute value sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.20

nqaJitterStatsSum2OfNegativesSDLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.21

nqaJitterStatsSum2OfNegativesSDHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.22

nqaJitterStatsMinOfPositivesDS

Gauge32

Read-only

This object indicates the minimum positive jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.23

nqaJitterStatsMaxOfPositivesDS

Gauge32

Read-only

This object indicates the maximum positive jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.24

nqaJitterStatsNumOfPositivesDS

Counter32

Read-only

This object indicates the number of positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.25

nqaJitterStatsSumOfPositivesDS

Counter32

Read-only

This object indicates the sum of positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.26

nqaJitterStatsSum2OfPositivesDSLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.27

nqaJitterStatsSum2OfPositivesDSHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.28

nqaJitterStatsMinOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.29

nqaJitterStatsMaxOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.30

nqaJitterStatsNumOfNegativesDS

Counter32

Read-only

This object indicates the number of negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.31

nqaJitterStatsSumOfNegativesDS

Counter32

Read-only

This object indicates the absolute value sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.32

nqaJitterStatsSum2OfNegativesDSLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.33

nqaJitterStatsSum2OfNegativesDSHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.34

nqaJitterStatsPacketLossSD

Counter32

Read-only

This object indicates the number of lost packets among the packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.35

nqaJitterStatsPacketLossDS

Counter32

Read-only

This object indicates the number of lost packets among the packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.36

nqaJitterStatsPacketOutOfSequences

Counter32

Read-only

This object indicates the number of packets with error sequence numbers received in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.37

nqaJitterStatsErrors

Counter32

Read-only

This object indicates errors not represented by other objects in this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.38

nqaJitterStatsBusies

Counter32

Read-only

This object indicates the number of initialization or resource application failures.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.39

nqaJitterStatsTimeouts

Counter32

Read-only

This object indicates the number of time-out packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.40

nqaJitterStatsProbeResponses

Counter32

Read-only

This object indicates the number of data packets to which responses have been received in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.41

nqaJitterStatsSentProbes

Counter32

Read-only

This object indicates the number of data packets sent in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.42

nqaJitterStatsDrops

Counter32

Read-only

This object indicates the number of data packets discarded owing to sending failure in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.43

nqaJitterStatsTestFinished

INTEGER

  • noFinish(0)
  • finish(1)

Read-only

This object indicates the status of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.44

nqaJitterStatsMaxDelaySD

Gauge32

Read-only

This object indicates the maximum time delay from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.45

nqaJitterStatsMaxDelayDS

Gauge32

Read-only

This object indicates the maximum time delay from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.46

nqaJitterStatsRTTAvg

Gauge32

Read-only

This object indicates the average RTT.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.47

nqaJitterStatsPacketLossRatio

Gauge32

Read-only

This object indicates the packet loss rate in a jitter test.

For jitter and ICMP jitter test instances, when the value of nqaJitterStatsSentProbes is 0, the packet loss rate is 100%.

1.3.6.1.4.1.2011.5.25.111.4.3.1.48

nqaJitterStatsAvgJitter

Gauge32

Read-only

This object indicates the average jitter value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.49

nqaJitterStatsAvgJitterSD

Gauge32

read-only

This object indicates the average jitter value from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.50

nqaJitterStatsAvgJitterDS

Gauge32

read-only

This object indicates the average jitter value from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.51

nqaJitterStatsJitterOut

OCTET STRING

Read-only

This object indicates the jitter values in sending packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.52

nqaJitterStatsJitterIn

OCTET STRING

Read-only

This object indicates the jitter values in receiving packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.53

nqaJitterStatsOWDOverThresholdsSD

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed and the packet delay from the source to the destination exceeds the OWD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.54

nqaJitterStatsPktLossUnknown

Counter32

Read-only

This object indicates the number of packets lost at an unknown direction in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.55

nqaJitterStatsNumOfOWD

Counter32

Read-only

This object indicates the number of sent packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.56

nqaJitterStatsOWSumSD

Counter32

Read-only

This object indicates the total number of OWDs from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.57

nqaJitterStatsOWSumDS

Counter32

Read-only

This object indicates the total number of OWDs from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.58

nqaJitterStatsOWDOverThresholdsDS

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed but the packet delay from the source to the destination exceeds the OWD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.59

nqaJitterStatsOperOfIcpif

Gauge32

read-only

This object indicates the ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.59

nqaJitterStatsOperOfIcpif

Gauge32

read-only

This object indicates the ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.60

nqaJitterStatsOperOfMos

Gauge32

read-only

This object indicates the MOS (Mean Opinion Score) value for the latest jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.61

nqaJitterStatsMinDelaySD

Gauge32

Read-only

This object indicates the minimum delay from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.62

nqaJitterStatsSum2DelaySDLow

Gauge32

Read-only

This object indicates the low order 32 bits of the sum of squares of one way time from source to destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.63

nqaJitterStatsSum2DelaySDHigh

Counter32

Read-only

This object indicates the high order 32 bits of the sum of squares of one way time from source to destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.64

nqaJitterStatsMinDelayDS

Gauge32

Read-only

This object indicates the minimum OWD from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.65

nqaJitterStatsSum2DelayDSLow

Gauge32

Read-only

This object indicates the low order 32 bits of the sum of squares of one way time from destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.66

nqaJitterStatsSum2DelayDSHigh

Counter32

Read-only

This object indicates the high order 32 bits of the sum of squares of one way time from destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.67

nqaJitterStatsTimeUnit

INTEGER
  • us(1)
  • ms(2)

Read-only

This object indicates the unit of the timestamp, which can be us(1) or ms(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.68

nqaJitterStatsAvgDelaySD

Gauge32

Read-only

This object indicates the average OWD from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.69

nqaJitterStatsAvgDelayDS

Gauge32

Read-only

This object indicates the average OWD from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.79

nqaJitterStatsStartTime Unsigned32

read-only

This object indicates the time when the Jitter test started.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.3.1.80

nqaJitterStatsEndTime Unsigned32

read-only

This object indicates the time when the Jitter test ended.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The latest test results can be displayed only when all the following conditions are met:
  • A get operation is performed.
  • The test instance type is jitter.
  • The value of nqaJitterStatsIndex is 0.
  • If the value of nqaJitterStatsCompletions is noResult(0) or negotiateFailed(3), the other statistics items are meaningless.
  • If the value of nqaJitterStatsSentProbes is 0, the other statistics items are meaningless.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142096

Views: 160406

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next