No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwSysSlaveSwitchTable

hwSysSlaveSwitchTable

This table is used to configure force switchover for the Cluster Central Chassis (CCCs) or the multiple Cluster Line-Card Chassis (CLCs). You can enable or disable the force switchover by using this table. You can also get the enable status of switchover for AMB (Active Main Board) and SMB (Standby Main Board) by using this table.

The index of this table is hwSysSlaveSwitchIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.19.1.3.7.1.1

hwSysSlaveSwitchIndex

Integer32 (1...80)

Not-accessible

The value of the object identifies the index of the table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.7.1.2

hwSysSlaveSwitchChassisNum

DisplayString

Read-write

The value of the object identifies the chassis number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.7.1.3

hwSysSlaveSwitchOperType

Integer {unused(1), slaveswitch(2), slaveswitchlock(3)}

Read-write

Operation type. The object has the following values:

  • unused(1): means the default value.

  • slaveswitch(2): perform force switchover.

  • slaveswitchlock(3): enable the force switchover, this value should be used with the object of hwSysSlaveSwitchEnableStatus.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.19.1.3.7.1.4

hwSysSlaveSwitchEnableStatus

EnabledStatus

Read-write

The enable status of switchover for AMB (Active Main Board) and SMB (Standby Main Board).

  • enable(1): enable the force switchover.

  • disable(2): disable the force switchover.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table cannot be accessed.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 174892

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next