No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Relationship Between Tables

Relationship Between Tables

Figure 176-1  Relationships between snmpTargetAddrTable and snmpTargetParamsTable

The index of snmpTargetAddrTable is snmpTargetAddrName. This table describes the destination IP addresses of the generated SNMP messages.

The index of snmpTargetParamsTable is snmpTargetParamsName. This table describes the SNMP parameters to be used when an SNMP message to the specified destination is generated.

The indexes of the two tables are the same. All the objects in the two table implement complete configurations of an alarm host. If only one table is set, the configurations of the alarm host do not take effect.

Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 170223

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next