No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwAclBasicRuleTable

hwAclBasicRuleTable

This table is used to create rules in a basic ACL rule group.

This table uses the index of hwAclNumGroupTable together with an object with the increasing value, that is, rule ID, as its index.

The indexes of this table are hwAclBasicAclNum and hwAclBasicSubitem.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.1.1.4.1.1

hwAclBasicAclNum

Integer32 ( 2000..2999 )

Read-only

The value of this object identifies the primary index.

It corresponds to the index of hwAclNumGroupTable, indicating the rule group number.

The value of the primary index ranges from 2000 to 2999.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.2

hwAclBasicSubitem

unsigned int32

Read-only

The value of this object identifies the secondary index.

It refers to the rule ID in the rule group.

The value ranges from 0 to 4294967294.

If the rule corresponding to the rule ID exists, the new rule overwrites the old one. This operation equals modifying an existent ACL rule.

If the rule corresponding to the rule ID does not exist, a new rule is created and inserted based on the order of the rule ID.

If no rule ID is specified, the system automatically assigns one when you create a rule.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.3

hwAclBasicAct

INTEGER

{

permit(1),

deny(2)}

Read-create

The value of this object identifies the action of an ACL rule.

The value can be:

  • permit(1): permits the packets that match the rule
  • deny(2): discards the packets that match the rule

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.4

hwAclBasicSrcIp

IpAddress

Read-create

The value of this object identifies the source IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.5

hwAclBasicSrcWild

IpAddress

Read-create

The value of this object identifies the wildcard mask of the source IP address.

The value ranges from 0.0.0.0 to 255.255.255.255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.6

hwAclBasicTimeRangeIndex

Integer32

Read-create

The value of this object identifies the index of a time range during which an ACL rule can be applied.

The value ranges from 0 to 256. The value 0 declares that the ACL rule has no time range.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.7

hwAclBasicFragments

INTEGER

{

fragmentSubseq(0),

fragment(1),

nonFragment(2),

nonSubseq(3)

none(255)

}

Read-create

This object cannot be modified once a rule is created.

This object indicates the type of the packet. The value can be:

  • 0: fragmentSubseq, indicating that the packet is a subsequent fragment
  • 1: fragment, indicating that the packet is a fragment
  • 2: nonFragment, indicating that the packet is not a fragment
  • 3: nonSubseq, indicating that the packet is not a subsequent fragment
  • 255: none, default

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.8

hwAclBasicLog

TruthValue

Read-create

This object indicates whether to record logs for the matched packets.

The log contents include the sequence number of an ACL rule, packets passed or discarded, upper layer protocol type over IP, source or destination address, source or destination port number, and number of packets.

The value can be:

  • true(1)
  • false(2)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.9

hwAclBasicEnable

TruthValue

Read-only

This object indicates whether the ACL rule takes effect currently

This object is Read-only.

The value can be:
  • true(1)
  • false(2)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.10

hwAclBasicCount

Counter64

Read-only

The value of this object identifies the count of bits matched with an ACL rule.

A maximum of 64 bits can be matched with an ACL rule.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.12

hwAclBasicRowStatus

RowStatus

Read-create

This object indicates the status of the rows.

Currently, CreateAndGo, Active and Destroy are implemented.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.4.1.13

hwAclBasicDescription

OCTET STRING (SIZE (1..127))

Read-create

The description of a basic ACL.

The length cannot exceed 127 characters.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

  • Before you create an ACL rule, the primary index must have a corresponding value in hwAclNumGroupTable.

  • When you create an ACL rule, hwAclBasicAct is necessarily configured.

  • When you specify the index of a time range during which an ACL rule can be applied, the time range that the index corresponds to must exist; otherwise, creating an ACL rule fails.

  • You need to specify the row status CreateAndGo of hwAclNumGroupRowStatus.

  • hwAclBasicDescription must be separately set, and does not support multiple variable bindings.

Modification Restriction

The following entries in this table cannot be modified after created:

hwAclBasicAct, hwAclBasicSrcIp, hwAclBasicSrcWild, hwAclBasicTimeRangeIndex, hwAclBasicFragments, hwAclBasicLog.

Deletion Restriction

You need to specify the row status destroy.

Access Restriction

The entries in this table have values only when the entries in hwAclNumGroupTable have values.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 214282

Downloads: 82

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next