No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mplsXCTable

mplsXCTable

This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections.

mplsLabelStackTable specifies the label stack information for a cross-connect LSR and is referred to from mplsXCTable.

A row in this table represents one cross-connect entry. It is indexed by the following objects:

  • cross-connect index mplsXCIndex that uniquely identifies a group of cross-connect entries

  • in-segment index, mplsXCInSegmentIndex

  • out-segment index, mplsXCOutSegmentIndex

LSPs originating at this LSR:

These are represented by using the special of value of mplsXCInSegmentIndex set to the string containing a single octet 0x00. In this case the mplsXCOutSegmentIndex MUST not be the string containing a single octet 0x00.

LSPs terminating at this LSR:

These are represented by using the special value mplsXCOutSegmentIndex set to the string containing a single octet 0x00.

Special labels:

Entries indexed by the strings containing the reserved MPLS label values as a single octet 0x00 through 0x0f (inclusive) imply LSPs terminating at this LSR. Note that situations where LSPs are terminated with incoming label equal to the string containing a single octet 0x00 can be distinguished from LSPs originating at this LSR because the mplsXCOutSegmentIndex equals the string containing the single octet 0x00.

An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol.

The index of this table is mplsXCIndex, mplsXCInSegmentIndex and mplsXCOutSegmentIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.10.166.2.1.10.1.1

mplsXCIndex

MplsIndexType

Not-accessible

Primary index for the conceptual row identifying a group of cross-connect segments. The string containing a single octet 0x00 is an invalid index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.2.1.10.1.2

MplsXCInSegmentIndex

MplsIndexType

Not-accessible

Incoming label index. If this object is set to the string containing a single octet 0x00, this indicates a special case outlined in the table's description above. In this case no corresponding mplsInSegmentEntry shall exist.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.2.1.10.1.3

mplsXCOutSegmentIndex

MplsIndexType

Not-accessible

Index of out-segment for LSPs not terminating on this LSR if not set to the string containing the single octet 0x00.

If the segment identified by this entry is terminating, then this object MUST be set to the string containing a single octet 0x00 to indicate that no corresponding mplsOutSegmentEntry shall exist.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.2.1.10.1.4

mplsXCLspId

MplsLSPID

Read-create

This value identifies the label switched path that this cross-connect entry belongs to. This object cannot be modified if mplsXCRowStatus is active(1) except for this object.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.2.1.10.1.6

mplsXCOwner

MplsOwner

Read-only

Denotes the entity that created and is responsible for managing this cross-connect.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.2.1.10.1.7

mplsXCRowStatus

RowStatus

Read-create

For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row except this object and the mplsXCStorageType can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.2.1.10.1.8

mplsXCStorageType

StorageType

Read-create

This variable indicates the storage type for this object. The agent MUST ensure that the associated in and out segments also have the same StorageType value and are restored consistently upon system restart.

This value SHOULD be set to permanent(4) if created as a result of a static LSP configuration.

Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.

Get return value nonvolatile(3).

Currently, the maximum access is read-only; the return value nonvolatile(3) is supported only.

1.3.6.1.2.1.10.166.2.1.10.1.9

mplsXCAdminStatus

INTEGER {up(1), -- ready to pass packetsdown(2),testing(3) -- in some test mode}

Read-create

The desired operating status of this segment.The value list as below:up (1),down (2), testing (3)The default value is up (name).

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.2.1.10.1.10

mplsXCOperStatus

INTEGER {up(1), -- ready to pass packetsdown(2),testing(3), -- in some test modeunknown(4), -- status cannot be determined-- for some reason.dormant(5),notPresent(6), -- some component is missinglowerLayerDown(7) -- down due to the state of-- lower layer interfaces}

Read-only

The actual operating status of this cross-connect.The value list as below:up (1),down (2),testing (3),unknown (4),dormant (5),notPresent (6),lowerLayerDown (7)

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

This table is accessible after an LSP is established.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142096

Views: 150537

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next