No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwAclIpv6AdvancedRuleTable

hwAclIpv6AdvancedRuleTable

This table is used to create the rule of an advanced ACL rule group. This table uses the index of hwAclIpv6NumGroupTable and the rule ID as the indexes.

The indexes of this table are hwAclIpv6AdvancedAclNum and hwAclIpv6AdvancedSubitem.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.1.1.13.1.1

hwAclIpv6AdvancedAclNum

Integer32

Read-only

This object indicates the primary index, which corresponds to the index in hwAclIpv6NumGroupTable. It indicates the number of a rule group. The value ranges from 3000 to 3999.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.2

hwAclIpv6AdvancedSubitem

Integer32

Read-only

This object indicates the secondary index, representing the ID of a rule in a rule group. The value ranges from 0 to 2047.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.3

hwAclIpv6AdvancedAct

INTEGER

Read-create

This object indicates the action corresponding to a rule:
  • permit
  • deny

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.4

hwAclIpv6AdvancedProtocol

Integer32

Read-create

This object identifies the protocol number. The value ranges from 1 to 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.5

hwAclIpv6AdvancedSrcIp

IpAddress

Read-create

This object indicates the source IP address.

Set this object in hexadecimal format.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.6

hwAclIpv6AdvancedSrcPrefix

IpAddress

Read-create

This object indicates the length of the source address prefix. The value ranges from 1 to 128.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.7

hwAclIpv6AdvancedSrcOp

INTEGER

Read-create

The value of this object identifies the operator of the source port range.

The value can be:

  • lt(1): indicates "less than".
  • eq(2): indicates "equal".
  • gt(3): indicates "larger than".
  • range(5): indicates "between".

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.8

hwAclIpv6AdvancedSrcPort1

Integer32

Read-create

This object identifies the lower limit on the source port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.9

hwAclIpv6AdvancedSrcPort2

Integer32

Read-create

This object identifies the upper limit on the source port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.10

hwAclIpv6AdvancedDestIp

IpAddress

Read-create

This object indicates the destination IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.11

hwAclIpv6AdvancedDestPrefix

IpAddress

Read-create

This object indicates the length of the destination address prefix. The value ranges from 1 to 128.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.12

hwAclIpv6AdvancedDestOp

INTEGER

Read-create

The value of this object identifies the operator of the destination port range.

The value can be:

  • lt(1): indicates "less than".
  • eq(2): indicates "equal".
  • gt(3): indicates "larger than".
  • range(5): indicates "between".

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.13

hwAclIpv6AdvancedDestPort1

Counter64

Read-create

This object identifies the lower limit on the destination port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.14

hwAclIpv6AdvancedDestPort2

Integer32

Read-create

This object identifies the upper limit on the destination port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.15

hwAclIpv6AdvancedPrecedence

Integer32

Read-create

This object identifies the precedence field, that is, three higher-order bits of the ToS field in an IP packet. The value ranges from 0 to 7.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.16

hwAclIpv6AdvancedTos

Integer32

Read-create

This object identifies the Precedence field, that is, four bits after the ToS field in an IP packet. The value ranges from 0 to 15.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.17

hwAclIpv6AdvancedDscp

Integer32

Read-create

This object identifies the DSCP value, that is, seven higher-order bits of the ToS field in an IP header. The value ranges from 0 to 63.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.19

hwAclIpv6AdvancedTimeRangeIndex

Integer32

Read-create

This object indicates the time range index referenced by a rule. The value ranges from 1 to 256.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.20

hwAclIpv6AdvancedIcmpType

Integer32

Read-create

This object identifies the ICMP type. The value ranges from 0 to 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.21

hwAclIpv6AdvancedIcmpCode

Integer32

Read-create

This object identifies the ICMP code. The value ranges from 0 to 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.22

hwAclIpv6AdvancedFragments

TruthValue

Read-create

This object indicates whether the packets are non-initial fragments:
  • true
  • false

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.23

hwAclIpv6AdvancedLog

TruthValue

Read-create

This object indicates whether a log is generated for a matching packet:
  • true
  • false

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.24

hwAclIpv6AdvancedEnable

TruthValue

Read-only

This object indicates whether the rule takes effect. The field is read only.
  • true
  • false

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.27

hwAclIpv6AdvancedRowStatus

RowStatus

Read-create

This object indicates the row status. The value can be CreateAndGo or destroy.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.13.1.28

hwAclIpv6AdvancedDescription

OCTET STRING

Read-create

This object indicates the description of an advanced ACL rule. The value ranges from 1 to 127.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

  • Before creating a rule, ensure that the value of the primary index exists in hwAclIpv6NumGroupTable.

  • When you create a rule, the hwAclIpv6AdvancedAct and hwAclIpv6AdvancedProtocol fields are mandatory.

  • You need to specify the values of hwAclIpv6AdvancedSrcIp and hwAclIpv6AdvancedSrcWild fields.

  • You need to specify the values of hwAclIpv6AdvancedSrcOp and (hwAclIpv6AdvancedSrcPort1 | hwAclIpv6AdvancedSrcPort2).

  • You need to specify the values of hwAclIpv6AdvancedDestIp and hwAclIpv6AdvancedDestWild.

  • You need to specify the values of hwAclIpv6AdvancedDestOp and (hwAclIpv6AdvancedDestPort1| hwAclIpv6AdvancedDestPort2).

  • hwAclIpv6AdvancedIcmpCode and hwAclIpv6AdvancedIcmpType must be specified simultaneously, and hwAclIpv6AdvancedIcmpType can be specified independently.

  • You need to apply the time range to the created rule in the MIB.

  • hwAclIpv6AdvancedDescription must be separately set, and does not support multiple variable bindings.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The value of this table exists only when the value of hwAclIpv6NumGroupTable exists.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 211013

Downloads: 82

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next