No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfExtLsdbTable

ospfExtLsdbTable

This table is about the OSPF Process's external LSA link state database.

The indexes in this table are ospfExtLsdbType, ospfExtLsdbLsid, and ospfExtLsdbRouterId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.14.12.1.1

ospfExtLsdbType

INTEGER{asExternalLink (5)}

Read-only

The type of the link state advertisement. Each link state type has a separate advertisement format.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.2

ospfExtLsdbLsid

IpAddress

Read-only

The Link State ID is an LS Type Specific field containing either a Router ID or an IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.3

ospfExtLsdbRouterId

RouterID

Read-only

The 32-bit number that uniquely identifies the originating router in the Autonomous System.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.4

ospfExtLsdbSequence

Integer32

Read-only

The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Therefore, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.5

ospfExtLsdbAge

Integer32

Read-only

This field is the age of the link state advertisement in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.6

ospfExtLsdbChecksum

Integer32

Read-only

This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.12.1.7

ospfExtLsdbAdvertisement

OCTET STRING(SIZE(36))

Read-only

The entire link state advertisement, including its header.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Before reading this MIB table, run the ospf mib-binding process-id command to bind the OSPF process to SNMP.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 161255

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next