No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nlmLogTable

nlmLogTable

This table contains the contents of logs. The external index of nlmLogTable is nlmLogName, the index of nlmConfigLogTable.

The index of this table is nlmLogName and nlmLogIndex.

OID

Object Name

Syntax

Access

Description

Implemented Specifications

1.3.6.1.2.1.92.1.3.1.1.1

nlmLogIndex

Unsigned32 (1..4294967295)

Not-accessible

This object indicates an incremental integer, which is used to index the named log. When the integer reaches the maximum value (an extremely unlikely event), the agent restore the value to 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.92.1.3.1.1.2

nlmLogTime

TimeStamp

Read-only

This object indicates the value of sysUpTime when an alarm is recorded in the log. If the log is created before the system initialization, this object value must be set to 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.92.1.3.1.1.3

nlmLogDateAndTime

DateAndTime

Read-only

This object indicates the local date and time recorded by the system when the entry was logged in. This function is available only on the system that has the date and time capability.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.92.1.3.1.1.4

nlmLogEngineID

SnmpEngineID

Read-only

This object indicates the ID of the SNMP engine where an alarm is generated. If the log can contain the alarm message from only one engine or the Trap is in SNMPv1 format, this object is a zero-length string.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.92.1.3.1.1.5

nlmLogEngineTAddress

TAddress

Read-only

This object indicates the transport service address of the SNMP engine from which the notification was received, formatted according to the corresponding value of nlmLogEngineTDomain.

This is used to identify the source of an SNMPv1 trap, since an nlmLogEngineId cannot be extracted from the SNMPv1 trap pdu. This object MUST always be instantiated, even if the log can contain notifications from only one engine.

Note that the nlmLogEngineTAddress may not uniquely identify the SNMP engine from which the notification was received.

For example, if an SNMP engine uses DHCP or NAT to obtain IP addresses, the address it uses may be shared with other network devices, and hence will not uniquely identify the SNMP engine.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.92.1.3.1.1.6

nlmLogEngineTDomain

TDomain

Read-only

Indicates the kind of transport service by which a Notification was received from an SNMP engine. nlmLogEngineTAddress contains the transport service address of the SNMP engine from which this Notification was received.

Possible values for this object are presently found in the Transport Mappings for SNMPv2 document (RFC 1906 [8]).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.92.1.3.1.1.7

nlmLogContextEngineID

SnmpEngineID

Read-only

This object indicates that if the received alarm packet, such as an SNMPv3 packet, carries a contextEngineID element, the value of this object is equal to the value of contextEngineID. Otherwise, the value of this object is a zero-length string.

This object is not supported in the current version, and the system will display a zero-length string.

1.3.6.1.2.1.92.1.3.1.1.8

nlmLogContextName

SnmpAdminString

Read-only

The name of the SNMP MIB context from which the Notification came. For SNMPv1 Traps this is the community string from the Trap.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.92.1.3.1.1.9

nlmLogNotificationID

OBJECT IDENTIFIER

Read-only

This object indicates NOTIFICATION-TYPE object that generates alarms.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entries in this table can be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 172536

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next