No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwRrmProfileTable

hwRrmProfileTable

This table is used to configure radio resource management parameters, including parameters related to band steering, smart roaming, and UAC.

The index of this table is hwRrmProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.18.1.1

hwRrmProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of the RRM profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.2

hwRrmAutoChannelSelectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the automatic channel selection function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.3

hwRrmAutoTxPowerSelectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the automatic power selection function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.4

hwRrmErrRateThreshold

Unsigned32(20–80)

read-write

This object indicates the error packet threshold triggering the automatic channel or power selection function. The default value is 60. It is expressed in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.5

hwRrmAirtimeFairSchduleSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the airtime scheduling function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.6

hwRrmDynamicEdcaSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the dynamic EDCA parameter adjustment function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.7

hwRrmUacLimitClientSnrSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the rejecting access from terminals with weak signals function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.8

hwRrmUacClientSnrThreshold

Unsigned32(5–75)

read-write

This object indicates the SNR threshold for rejecting access from terminals. The default value is 20. It is expressed in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.9

hwRrmUacPolicySwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the UAC policy function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.10

hwRrmUacPolicyType

INTEGER{users(1),channelUtilization(2),unknow(255)}

read-write

This object indicates the UAC policy. The default value is 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.11

hwRrmUacClientNumAccessThreshold

Integer32(1–256)

read-write

This object indicates the user CAC access threshold based on the number of users. If the number of online users reaches the threshold after a new user goes online, the AP will reject access requests of other new users. The default value is 64.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.12

hwRrmUacClientNumRoamThreshold

Integer32(1–256)

read-write

This object indicates the user CAC roaming threshold based on the number of users. When a user roams to an AP, the AP checks whether the current number of online users reaches the roaming threshold. If so, the AP denies access of the user.

The default value is 64.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.13

hwRrmUacReachThresholdHideSsidSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the function of hiding the SSID when the value of UAC reaches the specified threshold. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.14

hwRrmBandSteerDenyThreshold

Unsigned32(1–10)

read-write

This object indicates the maximum number of times the band steering function rejects association requests from terminals. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.15

hwRrmBandSteerLbClientThreshold

Unsigned32(0–100)

read-write

This object indicates the minimum number of terminals for triggering inter-band load balancing. The default value is 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.16

hwRrmBandSteerLbGapThreshold

Unsigned32(1–100)

read-write

This object indicates the load difference percentage for triggering inter-band load balancing. The default value is 20.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.17

hwRrmBandSteerClientBandsExpire

Unsigned32(10–300)

read-write

This object indicates the expiration condition for records of terminal supported bands. If the AP continuously receives probe messages from a terminal on the same band and the number of received probe messages exceeds the specified threshold, the records of terminal supported bands will be updated and the AP will consider that the terminal supports only this band. The default value is 35.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.18

hwRrmLoadBalanceSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the load balancing group function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.19

hwRrmLoadBalanceClientThreshold

Unsigned32(1–100)

read-write

This object indicates the percentage of terminals for triggering load balancing. The default value is 10. It is expressed in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.20

hwRrmLoadBalanceGapThreshold

Unsigned32(1–100)

read-write

This object indicates the load difference threshold for triggering load balancing, which is expressed in the number of terminals. The default value is 20.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.21

hwRrmLoadBalanceDenyThreshold

Unsigned32(1–10)

read-write

This object indicates the maximum number of times the load balancing function rejects association requests from terminals. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.22

hwRrmSmartRoamCheckType

Unsigned32

read-write

This object indicates whether STA active roaming is triggered by rate check or SNR check.

The values are as follows:
  • 1: checkSnr
  • 2: checkRate
  • 3: checkAll

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.23

hwRrmSmartRoamSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the smart roaming function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.24

hwRrmSmartRoamSnrThreshold

Unsigned32(5–75)

read-write

This object indicates the SNR threshold for triggering the smart roaming function. The default value is 20, in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.25

hwRrmSmartRoamRateThreshold

Unsigned32(1–100)

read-write

This object indicates the STA rate threshold for triggering the smart roaming function. It is expressed in the percentage against the maximum rate supported by the terminal. The default value is 20, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.26

hwRrmSmartRoamSnrHighLevelMargin

Unsigned32(10–20)

read-write

This object indicates the upper SNR difference threshold for triggering smart roaming. The default value is 15, in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.27

hwRrmSmartRoamSnrLowLevelMargin

Unsigned32(3–15)

read-write

This object indicates the lower SNR difference threshold for triggering smart roaming. The default value is 6, in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.28

hwRrmSmartRoamSnrCheckInterval

Unsigned32(3–30)

read-write

This object indicates the STA SNR detection interval for triggering smart roaming. The default value is 3, in second.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.29

hwRrmSmartRoamUnableRoamExpireTime

Unsigned32(30–2880)

read-write

This object indicates the aging time of records that STAs are "unable to roam". The default value is 120, in minute.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.30

hwRrmProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.31

hwRrmUacChannelUtiAccessThreshold

Integer32(1–100)

read-write

This object indicates the user CAC access threshold based on the channel usage. If the channel usage reaches the threshold after a new user goes online, the AP will reject access requests of other new users.

The value is expressed in percentage. The default value is 80.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.32

hwRrmUacChannelUtiRoamThreshold

Integer32(1–100)

read-write

This object indicates the user CAC roaming threshold based on the channel usage. When a user roams to an AP, the AP checks whether the current channel usage reaches the roaming threshold. If so, the AP denies access of the user.

The value is expressed in percentage. The default value is 80.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.33

hwRrmSmartRoamQuickKickoffRateThr

Unsigned32(1–100)

read-write

This object indicates the rate-based threshold for quickly disconnecting STAs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.34

hwRrmSmartRoamQuickKickoffSnrThr

Unsigned32(5–75)

read-write

This object indicates the SNR-based threshold for quickly disconnecting STAs.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

  • To modify hwRrmUacClientNumRoamThreshold, modify hwRrmUacClientNumAccessThreshold at the same time. hwRrmUacClientNumAccessThreshold can be separately cduionfigured.
  • To modify hwRrmUacChannelUtiRoamThreshold, modify hwRrmUacChannelUtiAccessThreshold at the same time. hwRrmUacChannelUtiAccessThreshold can be separately configured.
  • To modify hwRrmSmartRoamSnrHighLevelMargin, modify hwRrmSmartRoamSnrLowLevelMargin at the same time.

Deletion Restriction

The default profile cannot be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 176982

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next