No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
prialarmTable

prialarmTable

The prialarmTable is the RMON extension alarm table. Based on the alarm table defined in RFC 2819, expressions are added to set the alarm object and limit the existing period of the alarm entry in the table.

The index of this table is prialarmIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.1.3.4.4.1.1.1

prialarmIndex

Integer32 (1..65535)

Read-only

The value of this object identifies an index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.2

prialarmInterval

Integer32

Read-create

The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.3

prialarmVariable

DisplayString

Read-create

The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.4

prialarmSympol

DisplayString

Read-create

This object indicates the character string that describes the alarm line.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.5

prialarmSampleType

INTEGER {

absoluteValue(1),

deltaValue(2),

changeratioValue(3)

}

Read-create

The value of this object identifies the method of sampling the selected variable and calculating the value to be compared against the thresholds.

If the value of this object is absoluteValue, the sampled value is compared with the thresholds directly.

If the value of this object is deltaValue, the last sampled value is subtracted from the current sampled value, and the difference compared with the thresholds.

If the value is changeratioValue, the difference between the current sampled value and the last sampled value is divided by the sampled rate, and the result compared with the thresholds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.6

prialarmValue

Integer32

Read-only

The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.7

prialarmStartupAlarm

INTEGER { risingAlarm(1), fallingAlarm(2), risingOrFallingAlarm(3) }

Read-create

The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.8

prialarmRisingThreshold

Integer32

Read-create

A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.9

prialarmFallingThreshold

Integer32

Read-create

A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.10

prialarmRisingEventIndex

Integer32 (0..65535)

Read-create

The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.11

prialarmFallingEventIndex

Integer32 (0..65535)

Read-create

The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.12

prialarmStatCycle

Integer32

Read-create

The value of this object identifies that the time alarm line exists. When the value of prialarmStatType is during(2), set prialarmStatCycle to decide how long the alarm line exists.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.13

prialarmStatType

INTEGER{ forever(1), during(2) }

Read-create

The value of this object identifies the type of the alarm status. The type can be Forever(1) and During(2).

If the type is during(2), the alarm line is deleted after the time setting for prialarmStatCycle.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.14

prialarmOwner

OwnerString

Read-create

This object indicates the entity that configured this entry and is therefore using the resources assigned to it.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.1.3.4.4.1.1.15

prialarmStatus

EntryStatus

Read-create

This object indicates the status of this alarm entry.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be accessed without restriction.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 174388

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next