No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwAPTrafficProfileTable

hwAPTrafficProfileTable

This table is used to configure and query traffic profile parameters.

The index of this table is hwAPTrafficProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.23.1.1

hwAPTrafficProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a traffic profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.2

hwAPTrafficProfilePriorityMapDnTrustMode

INTEGER{trustDSCP(1),trust8021P(2)}

read-write

This object indicates the downstream service priority mapping mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.3

hwAPTrafficProfilePriorityDscpDnMap80211e

OCTET STRING(1–256)

read-write

This object indicates the mapping from DSCP priorities of 802.3 packets to user priorities of 802.11 packets when data packets are sent to an AP from upper-layer devices. DSCP priorities of 802.3 packets range from 0 to 63, and user priorities of 802.11 packets range from 0 to 7. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.4

hwAPTrafficProfilePriority80211eUpMapDscp

OCTET STRING(1–256)

read-write

This object indicates the mapping from user priorities of 802.11 packets to DSCP priorities of tunnel packets when data packets are sent to the AC from an AP. User priorities of 802.11 packets range from 0 to 7, and DSCP priorities of tunnel packets range from 0 to 63. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.5

hwAPTrafficProfileUserIsolate

INTEGER{disable(1),l2Isolate(3)}

read-write

This object indicates the user isolation mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.6

hwAPTrafficProfileRateLimitClientUp

Unsigned32(64–4294967295)

read-write

This object indicates the STA's uplink rate limit. The default value is 4294967295, in kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.7

hwAPTrafficProfileRateLimitClientDn

Unsigned32(64–4294967295)

read-write

This object indicates the STA's downlink rate limit. The default value is 4294967295, in kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.8

hwAPTrafficProfileRateLimitVapUp

Unsigned32(64–4294967295)

read-write

This object indicates the VAP's uplink rate limit. The default value is 4294967295, in kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.9

hwAPTrafficProfileRateLimitVapDn

Unsigned32(64–4294967295)

read-write

This object indicates the VAP's downlink rate limit. The default value is 4294967295, in kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.11

hwAPTrafficProfileIGMPSnooping

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the IGMP snooping function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.12

hwAPTrafficProfileIGMPSnoopingReportSuppress

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the IGMP snooping report suppression function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.13

hwAPTrafficProfileMcToUc

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the function of converting multicast to unicast. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.14

hwAPTrafficProfileOptimizeSuppressionBc

Unsigned32(0–14881000|4294967295)

read-write

This object indicates information about broadcast storm suppression. The unit is pps. The default value is 4294967295, indicating that broadcast storm suppression is not enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.15

hwAPTrafficProfileOptimizeSuppressionUc

Unsigned32(0–14881000|4294967295)

read-write

This object indicates information about unknown unicast storm suppression. The unit is pps. The default value is 4294967295, indicating that broadcast storm suppression is not enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.16

hwAPTrafficProfileOptimizeSuppressionMc

Unsigned32(0–14881000|4294967295)

read-write

This object indicates information about multicast storm suppression. The unit is pps. The default value is 4294967295, indicating that broadcast storm suppression is not enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.24

hwAPTrafficProfileOptimizeStaBridgeForward

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the STA bridge forwarding function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.25

hwAPTrafficProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.26

hwAPTrafficProfilePriorityMapUpTrustMode

INTEGER{trust80211e(1),trustdscp(2)}

read-write

Mapping priority from upper-layer network devices.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.27

hwAPTrafficProfilePriorityDscpUpMapDscp

OCTET STRING(1–256)

read-write

This object indicates the mapping from DSCP priorities of 802.11 packets to DSCP priorities of tunnel packets when data packets are sent to the AC from an AP. DSCP priorities range from 0 to 63. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.29

hwAPTrafficProfileMcToUcDynamicAdatptive

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable adaptive multicast-to-unicast conversion. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.30

hwAPTrafficProfileIGMPSnoopingMaxBandwidth

Unsigned32(0–10000000)

read-write

This object indicates the maximum multicast bandwidth of a VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.31

hwAPTrafficProfileIGMPSnoopingMaxUser

Unsigned32(0–1000)

read-write

This object indicates the maximum number of multicast group memberships on a VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.32

hwAPTrafficProfilePriorityDscpUpMap8021p

OCTET STRING(1–256)

read-write

This object indicates the mapping from DSCP priorities of 802.11 packets to 802.1p priorities of tunnel packets when data packets are sent to the AC from an AP. DSCP priorities of 802.11 packets range from 0 to 63, and 802.1p priorities of tunnel packets range from 0 to 7. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.33

hwAPTrafficProfilePriority80211eUpMap8021p

OCTET STRING(1–256)

read-write

This object indicates the mapping from user priorities of 802.11 packets to 802.1p priorities of tunnel packets when data packets are sent to the AC from an AP. User priorities of 802.11 packets and 802.1p priorities of tunnel packets range from 0 to 7. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.34

hwAPTrafficProfilePriority8021pDnMap80211e

OCTET STRING(1–256)

read-write

This object indicates the mapping from 802.1p priorities of 802.3 packets to user priorities of 802.11 packets when data packets are sent to an AP from upper-layer devices. 802.1p priorities of 802.3 packets and user priorities of 802.11 packets range from 0 to 7. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

Before setting hwAPTrafficProfileIGMPSnoopingReportSuppress to enable(2), set hwAPTrafficProfileIGMPSnooping to enable(2).

Deletion Restriction

This table cannot be deleted when other profiles are bound to it. The default profile of this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 160928

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next