No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
saviObjectsIfTable

saviObjectsIfTable

This table is used to configure SAVI on an interface.

The indexes of this table are saviObjectsIfIPVersion and saviObjectsIfIfIndex.

OID

Object Name

Syntax

Access

Description

Implemented Specifications

1.3.6.1.2.1.4.40.1.2.1.1

saviObjectsIfIPVersion

INTEGER

not-accessible

This object indicates the version of an IP address:
  • ipv6(2)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.40.1.2.1.2

saviObjectsIfIfIndex

Integer32

not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.40.1.2.1.3

saviObjectsIfValidationStatus

INTEGER

read-write

This object indicates whether source address check is enabled on the interface:
  • enable(1)
  • disable(2)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.40.1.2.1.4

saviObjectsIfTrustStatus

INTEGER

read-write

This object indicates the action taken by the interface to process packets:
  • no-trust(1): discards DHCP Advertise/Reply packets and RA packets.
  • dhcp-trust(2): permits DHCP Advertise/Reply packets to pass through.
  • ra-trust(3): permits RA packets to pass through.
  • savi-savi(4): permits any packets to pass through.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.40.1.2.1.5

saviObjectsIfFilteringNum

Unsigned32

read-write

This object indicates the maximum number of filtering entries on an interface.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

None.

Modification Restriction

None.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 171324

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next