No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwVpnCfgPingTable

hwVpnCfgPingTable

This table is used to create a VPNS CFG ping instance and initiate a probe to check the consistence of configurations on both ends of the VPN.

The index of this table is hwVpnCfgPingIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.2.1.1.1

hwVpnCfgPingIndex

Integer32

Not-accessible

The value of this object identifies the index of an operation instance. The value ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.2

hwVpnCfgPingPeerIpType

InetAddressType

Read-create

This object indicates the type of the peer IP address. It is used to identify the value type of hwVPNCFGPingPeerIP, which can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.3

hwVpnCfgPingPeerIp

InetAddress

Read-create

This object indicates the IP address of the peer end.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.4

hwVpnCfgPingVpnIdType

INTEGER { martiniVPLS(1), kompellaVPLS(2), l3vpn(3), pwe3(4), martiniVLL(5), bgpadVPLS(6), unknown(255)}

Read-create

This object indicates the type of the VPN flag. It is used to identify the value type of hwVPNCFGPingVPNID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.5

hwVpnCfgPingVpnId

OCTET STRING

Read-create

This object indicates a VPN flag. The value is a string of characters.
  • If the VPN is in VPLS mode, the flag is displayed as VSI name.
  • If the VPN is in L3VPN mode, the flag is displayed as VPN instance.

It is invalid for PWE3 or Martini VLL.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.6

hwVpnCfgPingPwId

Unsigned32

Read-create

The value of this object identifies the PW-ID. This value is configured for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.7

hwVpnCfgPingTunnelUsed

INTEGER

Read-create

This object indicates the forwarding mode (such as tunnel forwarding) of Request packets or Reply packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.8

hwVpnCfgPingOperation

EnabledStatus

Read-create

  • This object indicates the status of the operation instance.
  • enable(1): indicates that the operation instance is enabled.
  • disable(2): indicates that the operation instance is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.9

hwVpnCfgPingResultDetail

INTEGER

Read-only

This object indicates detailed results of the ping operation.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.10

hwVpnCfgPingRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.11

hwVpnCfgPingSecondary

INTEGER { primary(0), secondary(1), unknown(255)}

Read-create

The value of this object identifies that local pw is primary PW or secondary PW.
  • 0: primary PW
  • 1: secondary PW
  • 255: unknown

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.12

hwVpnCfgPingIfName

DisplayString

Read-create

This object indicates the name of AC interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.13

hwVpnCfgPingPwIdNew

Unsigned32

read-create

The value of this object identifies the PW-ID. This value is configured for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

At most five entries can be created in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

To delete a probe in use, you need to first stop the probe through hwVPNCFGPingOperation.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142096

Views: 149805

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next