No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwClockSourceCfgTable

hwClockSourceCfgTable

This table is used to set the parameters for a clock source.

The indexes of this table are hwClockCfgChassisIndex; hwClockCfgSourceIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.186.1.3.1.1

hwClockCfgChassisIndex

INTEGER

not-accessible

This object indicates the chassis ID.

Synchronous Ethernet clock is not supported in a stack system, so the chassis ID is always 0.

1.3.6.1.4.1.2011.5.25.186.1.3.1.2

hwClockCfgSourceIndex

Integer32

not-accessible

Indicates the clock source number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.186.1.3.1.3

hwClockCfgSourceId

Integer32

Read-only

This object indicates the ID of a clock source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.186.1.3.1.4

hwClockCfgSourceDescr

OctetString

Read-only

This object indicates the name of the clock source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.186.1.3.1.5

hwClockCfgWtrTime

Integer32 min: 0 max: 12

Read-write This object indicates the wait to restore (WTR) time of the clock source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.186.1.3.1.6

hwClockCfgBadDetect EnabledStatus

Read-write

This object indicates whether the frequency offset detection is enabled.

The implemented access right is read-only.

1.3.6.1.4.1.2011.5.25.186.1.3.1.7

hwClockCfgSystemPriority Integer32 min: -1 max: 255 Read-write This object indicates the priority of the system clock.

The value -1 indicates that the priority value is not supported. This value is not configurable.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.186.1.3.1.8

hwClockCfgBits0Priority Integer32 min: -1 max: 255 Read-write This object indicates the priority of the BITS0 clock source.

The value -1 indicates that the priority value is not supported. This value is not configurable.

The value ranges from 5 to 9 for BITS clock sources. If the priority is set to other values, the value of this object is displayed as -1.

1.3.6.1.4.1.2011.5.25.186.1.3.1.9

hwClockCfgBits1Priority Integer32 min: -1 max: 255 Read-write This object indicates the priority of the BITS1 clock source.

The value -1 indicates that the priority value is not supported. This value is not configurable.

The value ranges from 5 to 9 for BITS clock sources. If the priority is set to other values, the value of this object is displayed as -1.

1.3.6.1.4.1.2011.5.25.186.1.3.1.10

hwClockCfgSystemLockOut Integer32 Read-write This object indicates whether the clock source of the system clock is locked.

The value -1 indicates that clock source locking is not supported.

The local clock source and 19.44 MHz clock source cannot be locked. Other clock sources can be locked only after they have priority values configured.

1.3.6.1.4.1.2011.5.25.186.1.3.1.11

hwClockCfgBits0LockOut Integer32 Read-write This object indicates whether the clock source of BITS0 is locked.

The value -1 indicates that clock source locking is not supported.

The value ranges from 5 to 9 for BITS clocks. Other clock sources can be clocked only after they have priority values configured. If a clock source cannot be locked, the value of this object is displayed as -1.

1.3.6.1.4.1.2011.5.25.186.1.3.1.12

hwClockCfgBits1LockOut Integer32 Read-write This object indicates whether the clock source of BITS1 is locked.

The value -1 indicates that clock source locking is not supported.

The value ranges from 5 to 9 for BITS clocks. Other clock sources can be clocked only after they have priority values configured. If a clock source cannot be locked, the value of this object is displayed as -1.

1.3.6.1.4.1.2011.5.25.186.1.3.1.13

hwClockCfgSourceSsm Integer32 Read-write This object indicates the SSM quality level of the clock source. The value can be:
  • ssmPrc(1)
  • ssmSsut(2)
  • ssmSsul(3)
  • ssmSec(4)
  • ssmDnu(5)
  • ssmUnknown(6)

The SSM quality level cannot be set to ssmUnknown(6).

1.3.6.1.4.1.2011.5.25.186.1.3.1.14

hwClockCfgSourceSsmSetMode Enumeration Read-write This object indicates the mode for setting the SSM quality level of a clock source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.186.1.3.1.17

hwClockCfgSourceState Enumeration

Read-write

This object indicates whether clock signals from the clock source are lost.

The implemented access right is read-only.

1.3.6.1.4.1.2011.5.25.186.1.3.1.18

hwClockCfgSsmThreshold Enumeration

Read-only

This object indicates the threshold of the SSM quality level of the clock source.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.186.1.3.1.19

hwClockCfgSourceS1Id Integer32 min: 0 max: 255

Read-only

This object indicates the S1 byte of the clock source.

This object is not supported in this version.

1.3.6.1.4.1.2011.5.25.186.1.3.1.20

hwClockCfgFreqCheckResult Integer32 Read-write This object indicates the result of the frequency offset detection.

This object is currently read-only.

1.3.6.1.4.1.2011.5.25.186.1.3.1.21

hwClockCfgHoldOffTime Integer32 min: 3 max: 18 Read-write This object indicates the hold-off time of a clock source.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

None.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 173268

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next