No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwL2VlanIpSubnetVlanTable

hwL2VlanIpSubnetVlanTable

This table is used to configure the IP subnet-based VLAN.

The indexes of this table are hwL2VlanIpSubnetVlanVlanId and hwL2VlanIpSubnetVlanIpSubnetIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.1

hwL2VlanIpSubnetVlanVlanId

VlanId

Not-accessible

This object specifies the VLAN ID.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.2

hwL2VlanIpSubnetVlanIpSubnetIndex

Integer(1..12)

Not-accessible

This object indicates the index of the IP subnet.

The value ranges from 1 to 12.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.3

hwL2VlanIpSubnetVlanIpAddress

IpAddress

Read-create

This object specifies the source IP address or source network address that is the basis of the subnet-based VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.4

hwL2VlanIpSubnetVlanIpSubnetMask

IpAddress

Read-create

This object indicates the subnet mask.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.5

hwL2VlanIpSubnetVlanPriority

Integer(0..7)

Read-create

This object specifies the 802.1p priority of the VLAN corresponding to the specified IP address or network segment.

The value ranges from 0 to 7.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.6

hwL2VlanIpSubnetVlanRowStatus

RowStatus

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries can be created in this table.

The subnet-based VLANs are divided based on the source IP addresses and subnet masks in the packets. After receiving untagged packets through an interface, a device determines the VLANs to which the packets belong according to their source addresses before sending them to corresponding VLANs. This feature is used to send the packets from the specified network segment or IP address over the specified VLAN.

The entire equipment can be configured with 256 sub-VLANs and each VLAN can be configured with 12 sub-VLANs.

Modification Restriction

The entries in this table can be modified. Only the priorities can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restraint.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142096

Views: 160532

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next