No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwMplsOamEgrTable

hwMplsOamEgrTable

hwMplsOamEgrTable describes the OAM feature of the destination end of the detected LSP. It provides the following functions:

  • Creating, modifying and deleting OAM instances

  • Configuring the parameters of OAM, including the tunnel name bound to the detected LSP, OAM detection parameters, reverse channel parameters, and the enable flag

  • Querying the detection status, including whether the configuration takes effect, LSP availability status, and defect status

The indexes of this table are hwMplsOamEgrLspName, hwMplsOamEgrLsrId, and hwMplsOamEgrSessTunnId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1

hwMplsOamEgrLspName

OCTET STRING

accessible-for-notify

This object indicates the name of the LSP.

The value is a string of a maximum of 16 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2

hwMplsOamEgrLsrId

IpAddress

accessible-for-notify

This object indicates the LSR ID of the LSP ingress.

The value is a four-byte IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3

hwMplsOamEgrSessTunnId

Integer32 (0..65535)

not-accessible

This object indicates the ID of the tunnel bound to the LSP.

The value ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4

hwMplsOamEgrDetType

INTEGER { invalid(0), cv(1), ffd(2)}

Read-create

The value of this object identifies the OAM detection type.

Values are as follows:

  • 1: CV
  • 2: FFD
  • 0: invalid (automatic protocol enabled).

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5

hwMplsOamEgrDetFreq

INTEGER {cv1000ms(0), ffd10ms2(1), ffd20ms3(2), ffd50ms4(3), ffd100ms5(4), ffd200ms6(5), ffd500ms7(6),invalid8(7), ffd3ms9(8)}

Read-create

The value of this object identifies the OAM detection frequency.Values are as follows:

  • 1s (0)
  • 10 ms (1)
  • 20 ms (2)
  • 50 ms (3)
  • 100 ms (4)
  • 200 ms (5)
  • 500 ms (6)
  • invalid (7)
  • 8: 3ms

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6

hwMplsOamEgrRevType

INTEGER {invalid(0), rivate(1), share(2)}

Read-create

The value of this object identifies the reverse channel type.

Values are as follows:

0: invalid.

1: exclusive.

2: shared.

The default value is 2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7

HwMplsOamEgrRevTunnName

OCTET STRING

Read-create

This object indicates the name of the reverse tunnel.

The value is a string of a maximum of 16 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8

HwMplsOamEgrAutoEn

INTEGER {disable(0), enable(1)}

Read-create

The value of this object identifies the enable flag of the automatic protocol.

Values are as follows:

  • 0: disable
  • 1: enable

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9

HwMplsOamEgrAutoOvertime

Integer32 (0..255)

Read-create

The value of this object identifies the timeout period of the automatic protocol.

The value ranges from 0 to 255.

The default value is 10.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10

HwMplsOamEgrBDIFreq

INTEGER {perSecond(0),detectFrequency(1)}

Read-create

The value of this object identifies the BDI frequency.

Values are as follows:

  • 0: every second
  • 1: inheriting the packet reception frequency

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11

HwMplsOamEgrEnable

INTEGER {disable(0), enable(1)}

Read-create

The value of this object identifies whether OAM is enabled.

The values are as follows:

  • 0: disable
  • 1: enable

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12

HwMplsOamEgrValid

INTEGER {stop(1), start(2)}

Read-only

The value of this object identifies whether OAM configuration is valid.

Values are as follows:

  • 1: invalid
  • 2: valid

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13

HwMplsOamEgrAvaState

Integer32 (0..1)

Read-only

The value of this object identifies the LSP availability status.

Values are as follows:

  • 0: unavailable
  • 1: available

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14

HwMplsOamEgrDefectType

Integer32 (0..9)

Read-only

The value of this object identifies the LSP defect type.

Values are as follows:

  • 0: no defect
  • 1: dServer
  • 2: dPeerme
  • 3: dLocv
  • 4: dTTSI_Mismatch
  • 5: dTTSI_Mismerge
  • 6: dExcess
  • 7: dUnknown
  • 8: RLSN Down
  • 9: dEgressDown

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15

HwMplsOamEgrRowStatus

RowStatus

Read-create

The value of this object identifies the entry operation.

Values are as follows:

1: active

2: not in service

3: not ready

4: create and go

5: create and wait

6: destroy

There is no default value.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The creation restrictions are as follows:

  • When hwMplsOamEgrDetType is 1, hwMplsOamEgrDetFreq can only be 0. When hwMplsOamEgrDetType is 2, hwMplsOamEgrDetFreq can be any integer from 1 to 6.

  • When hwMplsOamEgrAutoEn is 1, you cannot set hwMplsOamEgrDetType or hwMplsOamEgrDetType. If not specified, hwMplsOamEgrAutoOvertime defaults to be 10. When hwMplsOamEgrAutoEn is 0, you must set hwMplsOamEgrDetType and hwMplsOamEgrDetFreq. If not specified, hwMplsOamEgrRevType defaults to be 2.

  • When hwMplsOamEgrRevType is 0, you cannot specify hwMplsOamEgrRevTunnName. When hwMplsOamEgrRevType is 0 or 2, if you do not specify hwMplsOamEgrRevTunnName, the system changes hwMplsOamEgrRevTyp to 0.

  • hwMplsOamEgrRowState is set to 4.

  • When creating new entries, you must set hwMplsOamIgrRowState, and cannot set hwMplsOamEgrValid, hwMplsOamEgrAvaState, and hwMplsOamEgrDefectType. Other parameters take the default values if not configured.

Modification Restriction

The modification restrictions are as follows:

  • When modifying entries, you can set only hwMplsOamEgrDetType, hwMplsOamEgrDetFreq, hwMplsOamEgrRevType, hwMplsOamEgrRevTunnName, hwMplsOamEgrAutoEn, hwMplsOamEgrAutoOvertime, hwMplsOamEgrBDIFreq, and hwMplsOamEgrEnable. Other parameters cannot be configured.

  • hwMplsOamIgrDetType and hwMplsOamIgrDetFreq must be set at the same time. When hwMplsOamIgrDetType is 1, hwMplsOamIgrDetFreq can only be 0. When hwMplsOamIgrDetType is 2, hwMplsOamIgrDetFreq can be any integer from 1to 6.

  • When hwMplsOamEgrAutoEn is 1, you cannot set hwMplsOamEgrDetType and hwMplsOamEgrDetType. If not specified, hwMplsOamEgrAutoOvertime defaults to be 10. When hwMplsOamEgrAutoEn is 1, you must set hwMplsOamEgrDetType and hwMplsOamEgrDetFreq. If not specified, hwMplsOamEgrRevType defaults to be 2.

  • When hwMplsOamEgrRevType is 0, you cannot specify hwMplsOamEgrRevTunnName. When the hwMplsOamEgrRevType is 1 or 2, if you do not specify the hwMplsOamEgrRevTunnName, the system will change the hwMplsOamEgrRevTyp to 0.

Deletion Restriction

When deleting entries, you need to set hwMplsOamIgrRowStatus to 6, and do not need to set the other parameters.

Accessing Restriction

The entries in this table can be read without restraint

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142096

Views: 127660

Downloads: 75

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next