No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
msdpMeshGroupTable

msdpMeshGroupTable

This table lists MSDP mesh group configurations.

The indexes of this table are msdpMeshGroupName and msdpMeshGroupPeerAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.3.92.1.1.12.1.1

msdpMeshGroupName

DisplayString (SIZE(1..64))

Not-accessible

The name of the mesh group.

The value is a string of 1 to 64 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.12.1.2

msdpMeshGroupPeerAddress

IpAddress

Not-accessible

A peer address that is a member of the mesh group with name msdpMeshGroupName.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.12.1.3

msdpMeshGroupStatus

RowStatus

Read-create

This entry's status, by which new entries may be added to the table and old entries deleted.
  • 1: active
  • 6: destroy

Currently, the Set operation supports CreateAndGo and Destroy.

When you perform the Set operation on the object, only the value within the range from the "!" character to the "~" character, corresponding to ANSIC codes from 33 to 126, is allowed.

Creation Restriction

An entry can be created successfully when msdpPeerTable has a corresponding row. This table supports only CreateAndGo. You must set msdpMeshGroupName, msdpMeshGroupPeerAddress, and msdpMeshGroupStatus together to succeed in creating a row.

The value range of msdpMeshGroupName supported by the MIB protocol is 1 to 64 but the command line supports only 1 to 32. Therefore, when the length of msdpMeshGroupName is set to be longer than 32, only the first 32 characters take effect.

Modification Restriction

The entries in this table can be read without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read only when MSDP is enabled and the peer is specified for the member in the mesh group.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 169172

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next