No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for VMware ESXi

HUAWEI SAN Storage Host Connectivity Guide for VMware ESXi Servers

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Determine Which Controller a Path Is Connected to?

How Can I Determine Which Controller a Path Is Connected to?

A path can be located using the initiator (host port) and the target (storage device port). Figure 7-1 illustrates how to obtain the path information about a storage device.

  • Determine a path connected to a Fibre Channel storage device by the initiator name's former part (for example vmhba4:C0) and the target name. Then based on the target name's latter part (for example 20:08:f8:4a:bf:57:af:b7), determine the storage device's Fibre Channel port that corresponds to the WWPN. The previous information can be combined to determine which controller the path connects to.
  • Determine the IPv4 address of an iSCSI storage device's Ethernet port by the target name's latter part (for example 97.97.97.201:3260). Then you can determine which controller the path connects to.
Figure 7-1 Port information about a path

Download
Updated: 2020-01-17

Document ID: EDOC1000144883

Views: 142617

Downloads: 7230

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next