No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Huawei SAN Storage Host Connectivity Guide for VMware ESXi

HUAWEI SAN Storage Host Connectivity Guide for VMware ESXi Servers

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
When Is Port Binding Needed?

When Is Port Binding Needed?

Port binding is needed when multiple VMkernel ports are available on a VMware ESXi host and all these ports are in the same IP subnet and broadcast domain.

An example is shown as follows:

Figure 7-2 Example wherein port binding is required

In this example, the networking configurations on the ESXi host are as follows:

Figure 7-3 Example network configurations where port binding is required

For details on configuring port binding, see the VMware knowledge base:

Updated: 2020-01-17

Document ID: EDOC1000144883

Views: 156244

Downloads: 7734

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next