No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for VMware ESXi

HUAWEI SAN Storage Host Connectivity Guide for VMware ESXi Servers

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
When Is Port Binding Not Needed?

When Is Port Binding Not Needed?

Port binding is not needed if:

  • In the array, the target iSCSI ports are in different broadcast domains or IP subnets.
  • The VMkernel ports for iSCSI connections are in different broadcast domains, IP subnets, or vSwitches.
  • Routing is required to reach the iSCSI array.

An example is shown as follows.

Figure 7-4 Example wherein port binding is not required

In this example, the networking configurations on the ESXi host are as follows:

Figure 7-5 Example network configurations where port binding is not required

For details, see the VMware knowledge base: https://kb.vmware.com/s/article/2088526.

Download
Updated: 2020-01-17

Document ID: EDOC1000144883

Views: 145145

Downloads: 7380

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next