No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei SAN Storage Host Connectivity Guide for VMware ESXi

HUAWEI SAN Storage Host Connectivity Guide for VMware ESXi Servers

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Identifying HBAs

Identifying HBAs

After an HBA is installed on a host, view information about the HBA on the host. Go to the page for configuration management and choose Storage Adapters in the navigation tree. In the function pane, hardware devices on the host are displayed, as shown in Figure 4-3.

Figure 4-3 Viewing the HBA information

Updated: 2020-01-17

Document ID: EDOC1000144883

Views: 143197

Downloads: 7277

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next