About This Document
Purpose
This guide describes how to install and uninstall the SCOM plugin and monitor Huawei devices.
Intended Audience
This document is intended for:
- Installation and commissioning engineers
- Technical support engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 05 (2018-10-17)
Modified Configuring an E9000 Server.
Issue 04 (2018-06-29)
Modified Configuring a Rack Server.
Issue 03 (2017-07-10)
Modified Configuring a Rack Server.
Issue 02 (2017-06-30)
Information about the support for E9000 server monitoring is added.
Issue 01 (2017-06-02)
This issue is the first official release.
