About This Document
Introduction
Planning Connectivity
Preparing for Configuration
Configuring Connectivity
Configuring Multipathing
FAQs
- The Host Failed to Restart After iSCSI Connections Are Established
- LUN Information Fails to Be Updated After LUN Replacement
- LUN Capacity Failed to Be Updated After Being Changed
- Drive Letter Changes After Link Down for a Long Time
- Modifying the iSCSI Timeout Parameter
- LUNs Cannot Be Detected on the Installation Page When SAN Boot Is Used to Install the OS
- On an iSCSI Network, the Initiator Cannot Be Connected When SAN Boot Is Configured Using a Storage LUN
- Acronyms and Abbreviations
Appendix A Volume Management
Appendix B High Availability Technology