No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei SAN Storage Host Connectivity Guide for Red Hat

HUAWEI SAN Storage Host Connectivity Guide for Red Hat Servers

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cluster Maintenance

Cluster Maintenance

Starting a Cluster

Run the following command to start a cluster:

# service cman start 
# service clvmd start 
# service gfs start 
# service rgmanager start

Stopping a Cluster

Run the following command to stop a cluster:

# service rgmanager stop
# service gfs stop
# service clvmd stop
# service cman stop

Checking Cluster Status

Run the following command to check the cluster status:

# clustat -l

Packet Service Switchover

Run the following command to switch a service from one node to another. This command switches the trssvc service to node webdb2.

# clusvcadm –r trssvc –m webdb2

Updated: 2020-01-17

Document ID: EDOC1000150157

Views: 68826

Downloads: 2081

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next