No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei SAN Storage Host Connectivity Guide for Red Hat

HUAWEI SAN Storage Host Connectivity Guide for Red Hat Servers

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Commands

Common Commands

Table 2-3 lists the common management commands used in Red Hat hosts.

Table 2-3 Red Hat commands




Views the file system size and usage.

fdisk /dev/sd#

Partitions sd# disks.


Configures network port parameters.


Displays the hardware address, type, and manufacturer of each disk.

lvdisplay -v /dev/vgname/lvname

Views details about lvname.


Mounts a logical volume.

shutdown -h now

Shuts down the host.

shutdown –ry 0

Restarts the host.

vgdisplay -v vgname

Views details about vgname.


Scans for volume groups in the system.

The pound (#) in the table indicates a number that can be specified based on actual conditions.

Updated: 2020-01-17

Document ID: EDOC1000150157

Views: 68975

Downloads: 2083

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next