No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei SAN Storage Host Connectivity Guide for SUSE

HUAWEI SAN Storage Host Connectivity Guide for SUSE Linux Servers
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Scanning LUNs on a Host

Scanning LUNs on a Host

After establishing connections, scan for LUNs on a host.

  1. Run the rpm -qa | grep sg3_utils command to check whether sg3_utils is installed on the host. Generally, sg3_utils is installed on a SUSE host by default.

    Figure 5-26 Checking whether sg3_utils is installed
    • If sg3_utils is installed, perform 2 to scan for LUNs.
    • If sg3_utils is not installed, upload the sg3_utils installation package (.rmp) in the OS ISO file to the host and run the rpm -ivh command to install sg3_utils.

  2. Run the command on the host to scan for LUNs mapped from the storage system.
Updated: 2019-05-16

Document ID: EDOC1000150158

Views: 38274

Downloads: 535

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next