No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for SUSE

HUAWEI SAN Storage Host Connectivity Guide for SUSE Linux Servers
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LUN Capacity Failed to Be Updated After Being Changed

LUN Capacity Failed to Be Updated After Being Changed

Symptom

After the capacity of a LUN is changed, the new capacity of the LUN is not updated after system script /usr/bin/rescan-scsi-bus.sh is executed.

Root Cause

The LUN capacity is not updated on the host.

Solution

Run the echo 1 > /sys/block/sd*/device/rescan command to update the LUN and then execute /usr/bin/rescan-scsi-bus.sh.

Download
Updated: 2019-05-16

Document ID: EDOC1000150158

Views: 37902

Downloads: 534

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next