No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for SUSE

HUAWEI SAN Storage Host Connectivity Guide for SUSE Linux Servers
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common SUSE Commands

Common SUSE Commands

Table 2-3 lists the common management commands used in SUSE hosts.

Table 2-3 SUSE commands

Command

Function

df

Views the file system size and usage.

fdisk /dev/sd#

Partitions sd# disks.

cat /sys/class/scsi_host/host*/modelname

Views the Fibre Channel HBA model.

cat /sys/class/scsi_host/host*/fwrev

Views the Fibre Channel HBA firmware.

ifconfig

Configures network port parameters.

lsscsi

Displays the hardware address, type, and manufacturer of each disk.

lvdisplay -v /dev/vgname/lvname

Views details about lvname.

mount

Mounts a logical volume.

shutdown -h now

Shuts down the host.

shutdown –ry 0

Restarts the host.

vgdisplay -v vgname

Views details about vgname.

vgscan

Scans for volume groups in the system.

NOTE:

The pound (#) in the table indicates a number that can be specified based on actual conditions.

Download
Updated: 2019-05-16

Document ID: EDOC1000150158

Views: 37751

Downloads: 534

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next