No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for SUSE

HUAWEI SAN Storage Host Connectivity Guide for SUSE Linux Servers
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying HBA Properties

Querying HBA Properties

This section describes how to query the attributes of QLogic and Emulex HBAs, including their models, driver versions, firmware versions, WWNs, port topologies, and port rates. To query other attributes or other vendors' HBAs, it is recommended that you use the management software provided by the respective HBA vendor. See the operation guide of the corresponding HBA management software for detailed operations.

QLogic

Figure 4-2 shows the command for querying the QLogic HBA model.

Figure 4-2 HBA model

Figure 4-3 shows the command for querying the QLogic HBA driver version.

Figure 4-3 HBA driver version

Figure 4-4 shows the command for querying the QLogic HBA firmware version.

Figure 4-4 HBA firmware version

Figure 4-5 shows the command for querying the QLogic HBA WWN.

Figure 4-5 HBA WWN

Figure 4-6 shows the command for querying the QLogic HBA topology.

Figure 4-6 HBA topology

Figure 4-7 shows the command for querying the QLogic HBA port rate.

Figure 4-7 HBA port rate

Emulex

Figure 4-8 shows the command for querying the Emulex HBA model.

Figure 4-8 HBA model

Figure 4-9 shows the command for querying the Emulex HBA driver version.

Figure 4-9 HBA driver version

Figure 4-10 shows the command for querying the Emulex HBA firmware version.

Figure 4-10 HBA firmware version

Figure 4-11 shows the command for querying the Emulex HBA WWN.

Figure 4-11 HBA WWN

Figure 4-12 shows the command for querying the Emulex HBA topology.

Figure 4-12 HBA topology

Figure 4-13 shows the command for querying the Emulex HBA port rate.

Figure 4-13 HBA port rate

Download
Updated: 2019-05-16

Document ID: EDOC1000150158

Views: 37750

Downloads: 534

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next