No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for SUSE

HUAWEI SAN Storage Host Connectivity Guide for SUSE Linux Servers
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cluster Maintenance

Cluster Maintenance

Starting a Cluster

Run the following command to start a cluster:

# /etc/init.d/heartbeat start

Run the following command to restart a cluster:

# /etc/init.d/heartbeat restart

Stopping a Cluster

Run the following command to stop a cluster:

# /etc/init.d/heartbeat stop

Checking Cluster Status

Run the following command to check the cluster status:

# /etc/init.d/heartbeat status

Packet Service Switchover

You can run this command to stop the packet service on the current node and switch the service to another node.

# /etc/init.d/heartbeat stop

Download
Updated: 2019-05-16

Document ID: EDOC1000150158

Views: 39773

Downloads: 541

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next