No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for Windows

HUAWEI SAN Storage Host Connectivity Guide for Windows Servers
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Planning Connectivity

Planning Connectivity

Windows hosts and storage systems can be connected based on different criteria. Table 3-1 describes the typical connection modes.

Table 3-1 Connection modes

Criteria

Connection Mode

Interface module type

Fibre Channel connection/iSCSI connection

Whether switches are used

Direct-attached connection (no switches are used)/Fabric-attached connection (switches are used)

Whether multiple paths exist

Single-path connection/Multi-path connection

Whether HyperMetro is configured

HyperMetro/Non-HyperMetro

Fibre Channel connections are the most widely used. To ensure service data security, both direct-attached connections and fabric-attached connections require multiple paths.

The following details Fibre Channel and iSCSI connections in HyperMetro and non-HyperMetro scenarios.

Download
Updated: 2019-08-22

Document ID: EDOC1000150159

Views: 76227

Downloads: 3465

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next