No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei SAN Storage Host Connectivity Guide for Windows

HUAWEI SAN Storage Host Connectivity Guide for Windows Servers
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Identifying HBAs

Identifying HBAs

After an HBA is installed on a host, you can view whether the HBA exists in Device Manager. If the HBA exists, the physical connection of the HBA is correct. Then check whether there is a question mark or exclamation mark on the HBA name. If there is no such mark, the HBA driver is normal.

Figure 4-2 Checking HBA installation in Device Manager

Updated: 2019-08-22

Document ID: EDOC1000150159

Views: 81561

Downloads: 3545

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next