No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for Windows

HUAWEI SAN Storage Host Connectivity Guide for Windows Servers
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Modify the Timeout Time for the FC HBA Port Driver?

How Do I Modify the Timeout Time for the FC HBA Port Driver?

When a Windows host connects to a storage array through FC HBAs, the FC HBA port driver's timer parameter directly affects the time of a multipath switchover upon a fault. For common FC HBAs from Emulex and QLogic, it is advisable to set Port Down Retry Count and Link Down Timeout to 10.

Before modifying FC HBA port parameters, you need to download the HBA management tool from the HBA vendor. The following describes how to modify Emulex and QLogic FC HBAs' port parameters.

Download
Updated: 2019-08-22

Document ID: EDOC1000150159

Views: 77411

Downloads: 3482

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next