No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for Windows

HUAWEI SAN Storage Host Connectivity Guide for Windows Servers
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying QLogic HBA Driver Parameters

Modifying QLogic HBA Driver Parameters

  1. Download and install the QLogic HBA management tool. Go to the following website to download the tool:

    http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/DefaultNewSearch.aspx

  2. Open the management tool.

    After downloading and installing the tool, open the tool (2.1.0 build 11) and run the qaucli command to navigate to the management CLI.

    Figure 7-4 Management console CLI

  3. Set HBA parameters.

    Select 2: Adapter Configuration. The following window is displayed.

    Figure 7-5 HBA parameters

    Select 3: HBA Parameters. The HBA port status window is displayed.

    Figure 7-6 HBA port status

    Select a port and go to the HBA Parameters Menu.

    Figure 7-7 HBA parameters menu

    Select 2: Configure HBA Parameters. The Configure Parameters Menu window is displayed.

    Figure 7-8 Configure Parameters Menu

    Select 13 and 15. Set the values of the parameters to 10. Then select 20: Commit Changes. After the configuration, check the HBA parameters.

    Figure 7-9 HBA parameter configuration

  4. Complete the configurations of all ports.
  5. Repeat the preceding steps to configure other ports.
Download
Updated: 2019-08-22

Document ID: EDOC1000150159

Views: 76480

Downloads: 3467

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next