No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAN Storage Host Connectivity Guide for Windows

HUAWEI SAN Storage Host Connectivity Guide for Windows Servers

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Emulex HBA Driver Parameters

Modifying Emulex HBA Driver Parameters

  1. From the Emulex official website, download the One Command Manager and install it to the Windows host:

    https://www.broadcom.com/products/storage/fibre-channel-host-bus-adapters/onecommand-manager-centralized#downloads

  2. Open the Emulex HBA management tool. This tool will automatically detect the Emulex HBA port that the local host uses. Select the HBA port, click Driver Parameters tab, select the parameter you want to modify, type the value, and click Apply, as shown in Figure 7-3.

    Figure 7-3 Modifying the values of the timeout parameters

Download
Updated: 2020-01-17

Document ID: EDOC1000150159

Views: 88897

Downloads: 3634

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next