No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

License Usage Guide

CloudEngine 12800 and 12800E Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of License Control Items

Overview of License Control Items

Common License

Table 2-1 License control items supported by the CE12800 series switches

License Control Item

Model

Minimum Version Required

Before License Activation

After License Activation

MPLS function of the CE12800: DE0S00MPLS01

CE128-LIC-MPLS

V100R001C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

TRILL function of the CE12800: DE0S0TRILL01

CE128-LIC-TRILL

V100R001C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

VS function of the CE12800: DE0S0000VS01

CE128-LIC-VS

V100R002C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

IPv6 function of the CE12800: CE128-LIC-IPv6

CE128-LIC-IPv6

V100R002C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

EVN function of the CE12800: CE128-LIC-EVN

CE128-LIC-EVN

V100R003C00

This function does not take effect and cannot be configured.

No license is required when EVN BGP is applied for the ARP broadcast packet suppression function in a VXLAN.

This function takes effect and can be configured.

FCF for all ports of the CE12800: CE-LIC-FCF-ALL

CE128-LIC-FCFAL

V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

FCF for 48 ports of the CE12800: CE-LIC-FCF-PORT

CE128-LIC-FCF48

V100R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

Telemetry function of the CE12800: CE-LIC-TLM

CE128-LIC-TLM

V200R003C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

MACsec function of the CE12800: CE-LIC-MACSEC

CE128-LIC-MACSEC

V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

Function authorization package 1 of the CE12800: CE128-LIC-BUN01

CE128-LIC-BUN01

V100R003C00

The MPLS, TRILL, VS, IPv6, and EVN functions do not take effect and cannot be configured.

The MPLS, TRILL, VS, IPv6, and EVN functions take effect and can be configured.

Function authorization package 3 of the CE12800: CE128-LIC-BUN03

CE128-LIC-BUN03

V100R005C00

The MPLS, TRILL, VS, IPv6, EVN, and FCF functions do not take effect and cannot be configured.

The MPLS, TRILL, VS, IPv6, EVN, and FCF functions take effect and can be configured.

Stacking enhancement license of service ports on the CE12800: CE128-LIC-ESTK

CE128-LIC-ESTK

V200R002C50

The MPLS, TRILL, VS, IPv6, EVN, and FCF functions do not take effect and cannot be configured.

The MPLS, TRILL, VS, IPv6, EVN, and FCF functions take effect and can be configured.

Table 2-2 License control items supported by the CE12800E series switches

License Control Item

Model

Product Model and Minimum Version

Before License Activation

After License Activation

VS function of the CE12800E: DE0S0000VS01

CE128E-LIC-VS

CE12800E equipped with the ED-E, EG-E, or EGA-E series cards: V200R002C50

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

IPv6 function of the CE12800E: CE128-LIC-IPv6

CE128E-LIC-IPV6

V200R002C50

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

NSH function of the CE12800E: CE-LIC-NSH

CE128E-LIC-NSH

CE12800E equipped with the ED-E, EG-E, or EGA-E series cards: V200R002C50

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

Telemetry function of the CE12800E: CE-LIC-TLM

CE128E-LIC-TLM

V200R003C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

Low-latency network function of the CE12800E: CE-LIC-LLETH

CE128E-LIC-AIF

CE12800E equipped with the FD-X series cards: V200R005C00

Low-latency network functions excluding rapid ECN congestion flag and dynamic load balancing do not take effect and cannot be configured.

This function takes effect and can be configured.

1588v2 (PTP) function of the CE12800E: CE-LIC-PTP

CE128E-LIC-PTP

CE12800E equipped with the FD-X series cards: V200R005C00

CE12800E equipped with the ED-E, EG-E, and EGA-E series cards: V200R005C10

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

Discarded packet capture function of the CE12800E: CE-LIC-TLM

CE128E-LIC-TLM

CE12800E equipped with the FD-X series cards: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

IOAM function of the CE12800E: CE-LIC-TLM

CE128E-LIC-TLM

CE12800E equipped with the FD-X series cards: V200R005C00

This function does not take effect and cannot be configured.

This function takes effect and can be configured.

NOTE:
  • After a license is loaded, you can configure the Telemetry function only after the device is restarted in the V200R003C00 version, and you can configure functions corresponding to other features without the need of restarting the device.

  • FCF is controlled by two kinds of licenses: CE-LIC-FCF-ALL and CE-LIC-FCF-PORT. For the CE-LIC-FCF-ALL license, the FCF function can be configured on all ports. For the CE-LIC-FCF-PORT license, the FCF function can be configured on a total of 48 ports on the same card or different cards. You can load multiple CE-LIC-FCF-PORT licenses on a device to meet capacity expansion requirements.
  • For the CE12800E equipped with the ED-E/EG-E/EGA-E series cards, the 1588v2 function has been controlled by the license since V200R005C10. If the switch is upgraded from V200R005C00 to V200R005C10 or a later version, the 1588v2 function is not affected, but the 1588v2 function configuration cannot be added or modified. You are advised to apply for and load a 1588v2 license after the upgrade.
  • CE12800 series switches support the NGFW module. For license information of the NGFW module, see:
  • CE12800 series switches support the IPS module. For license information of the IPS module, see:

N1 Software Package

Table 2-3 N1 software packages supported by CE12800 series switches

License Control Item

External License Model/Annual Fee Code

Minimum Version Required

Before License Activation

After License Activation

N1 foundation function package of the CE12800

External license model: N1-CE128LIC-CFFD

V200R005C10

If the Agile Controller-DCN manages the CE12800, the VS, IPv6, and Telemetry functions do not take effect and cannot be configured.

If the Agile Controller-DCN manages the CE12800, the VS, IPv6, and Telemetry functions take effect and can be configured.

License annual fee code: N1-CE128CFFD-SnS1Y

N/A

Upgrade, maintenance, and migration cannot be performed.

The upgrade, maintenance, and migration services are controlled by the usage duration of the purchased license. The usage duration is in the range from three years to five years. After the annual fee expires, the license function package still takes effect, but the upgrade, maintenance, and migration services become unavailable. You are advised to renew the annual fee as required.

N1 advanced function package of the CE12800

External license model: N1-CE128LIC-CFAD

V200R005C10

If the Agile Controller-DCN manages the CE12800, the VS, IPv6, Telemetry, and MPLS functions do not take effect and cannot be configured.

If the Agile Controller-DCN manages the CE12800, the VS, IPv6, Telemetry, and MPLS functions take effect and can be configured.

License annual fee code: N1-CE128CFAD-SnS1Y

N/A

Upgrade, maintenance, and migration cannot be performed.

The upgrade, maintenance, and migration services are controlled by the usage duration of the purchased license. The usage duration is in the range from three years to five years. After the annual fee expires, the license function package still takes effect, but the upgrade, maintenance, and migration services become unavailable. You are advised to renew the annual fee as required.

Table 2-4 N1 software packages supported by CE12800E series switches

License Control Item

External License Model/Annual Fee Code

Minimum Version Required

Before License Activation

After License Activation

N1 foundation function package of the CE12800E

External license model: N1-CE128ELIC-CFFD

V200R005C10

If the Agile Controller-DCN manages the CE12800E, the VS, IPv6, and Telemetry functions do not take effect and cannot be configured.

If the Agile Controller-DCN manages the CE12800E, the VS, IPv6, and Telemetry functions take effect and can be configured.

License annual fee code: N1-CE128ECFFD-SnS1Y

N/A

Upgrade, maintenance, and migration cannot be performed.

The upgrade, maintenance, and migration services are controlled by the usage duration of the purchased license. The usage duration is in the range from three years to five years. After the annual fee expires, the license function package still takes effect, but the upgrade, maintenance, and migration services become unavailable. You are advised to renew the annual fee as required.

N1 advanced function package of the CE12800E

External license model: N1-CE128ELIC-CFAD

V200R005C10

If the Agile Controller-DCN manages the CE12800E, the VS, IPv6, Telemetry, and NSH functions do not take effect and cannot be configured.

If the Agile Controller-DCN manages the CE12800E, the VS, IPv6, Telemetry, and NSH functions take effect and can be configured.

License annual fee code: N1-CE128ECFAD-SnS1Y

N/A

Upgrade, maintenance, and migration cannot be performed.

The upgrade, maintenance, and migration services are controlled by the usage duration of the purchased license. The usage duration is in the range from three years to five years. After the annual fee expires, the license function package still takes effect, but the upgrade, maintenance, and migration services become unavailable. You are advised to renew the annual fee as required.

N1 AI Fabric function package of the CE12800E

External license model: N1-CE128ELIC-AIF

CE12800E equipped with FD-X series cards: V200R005C10

Low-latency network functions excluding fast ECN and dynamic load balancing do not take effect and cannot be configured.

The corresponding functions take effect and can be configured.

License annual fee code: N1-CE128EAIF-SnS1Y

N/A

Upgrade, maintenance, and migration cannot be performed.

The upgrade, maintenance, and migration services are controlled by the usage duration of the purchased license. The usage duration is in the range from three years to five years. After the annual fee expires, the license function package still takes effect, but the upgrade, maintenance, and migration services become unavailable. You are advised to renew the annual fee as required.

Updated: 2019-04-20

Document ID: EDOC1000150343

Views: 9755

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next