No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server Compute Node and Switch Module iBMC (V250 to V259) User Guide 17

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deactivating an SOL Session (sol -d deactivate)

Deactivating an SOL Session (sol -d deactivate)

Function

The sol -d deactivate command is used to deactivate an SOL session forcibly.

Format

ipmcset -t sol -d deactivate -v <index>

Parameters

Parameter

Description

Value

index

Serial number of the SOL session.

  • 1: session 1.
  • 2: session 2.

Usage Guidelines

Only iBMC 2.56 and later versions support this command.

The switch module does not support the command.

The SOL session established by using IPMItool cannot be deactivated.

Example

# Deactivate SOL session 1.

iBMC:/->ipmcset -t sol -d deactivate -v 1
Close SOL session successfully. 
Translation
Download
Updated: 2019-02-28

Document ID: EDOC1000157052

Views: 94523

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next