No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting Syslog (syslog -d state)

Querying and Setting Syslog (syslog -d state)


The syslog -d state command is used to query and set the syslog feature for the iBMC.


ipmcget -t syslog -d state [-v destination]

ipmcset -t syslog -d state -v [destination] <disabled | enabled>


Parameter Description Value
destination Identifies the channel sending syslog messages.
  • Value range: 1 to 4

  • If this parameter is not specified, the command is used to set the syslog function.

disabled Disables syslog. -
enabled Enables syslog. -

Usage Guidelines

  • To set syslog for a specific channel, specify destination. The value range of destination is 1 to 4.

  • To enable or disable the syslog function, leave destination unspecified.


# Disable syslog for channel 1.

iBMC:/->ipmcset -t syslog -d state -v 1 disabled
Set syslog dest1 disabled successfully.

# Query the syslog status of channel 1.

iBMC:/-> ipmcget -t syslog -d state -v 1
syslog dest1 state: disabled
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 134277

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next