No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting User Rights (privilege)

Setting User Rights (privilege)


The privilege command is used to set user rights.


ipmcset [-t user] -d privilege -v <username> <privalue>


Parameter Description Value
username Specifies the user to be set. -
privalue Specifies user rights.
  • 15: No Access
  • 2: User
  • 3: Operator
  • 4: Administrator
  • 5: Custom Role 1
  • 6: Custom Role 2
  • 7: Custom Role 3
  • 8: Custom Role 4

Usage Guidelines

  • Only administrators can set user rights, and the administrator's password is required.

  • This command cannot be used to set rights of default users.

  • This command cannot be used to set the rights of online users.


# Grant user test with the Administrator rights.

iBMC:/->ipmcset -d privilege -v test 4
Input your password:
Set user privilege successfully.
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 133141

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next