No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 20

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the UID Indicator (identify)

Setting the UID Indicator (identify)


The identify command is used to set the UID indicator.


ipmcset -d identify [ -v {time | force }]


Parameter Description Value
time Specifies the time (in seconds) for which the UID indicator blinks.

Value range: 0 to 255

The value 0 indicates that the UID indicator is off.

force Forces the UID indicator to be steady on. -

Usage Guidelines

If time is not set, the UID indicator blinks for 15 seconds by default.


# Turn on the UID indicator permanently.

iBMC:/->ipmcset -d identify -v force
Identify UID led successfully.
Updated: 2019-11-19

Document ID: EDOC1000157052

Views: 152402

Downloads: 271

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next