No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting NTP State (ntp -d status)

Setting NTP State (ntp -d status)

Function

The ntp -d status command is used to enable or disable the NTP function.

Format

ipmcset -t ntp -d status -v status

Parameters

Parameter

Description

Value

status Indicates the NTP status.
  • enabled
  • disabled

Usage Guidelines

None

Example

# Enable the NTP function.

iBMC:/->ipmcset -t ntp -d status -v enabled
Set NTP enable status (enabled) successfully.

# Query NTP information.

iBMC:/->ipmcget -d ntpinfo
Status             : enabled
Mode               : dhcpv6
Preferred Server   : 2016:ed8:77b5:0:192:168:2:26
Alternative Server : 2016:ed8:77b5:0:192:168:9:77
Synchronize        : successful
Auth Enable        : disabled
Group Key          : not imported
Translation
Download
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 132577

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next