No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 20

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Help Information (help)

Viewing Help Information (help)


The help command is used to view help information.



[command] --help


Parameter Description Value
command The command is to be queried. -

Usage Guidelines



# View the commands supported in the current path.

help      :       Used to get context sensitive help.                                                                               
exit      :       Used to terminate the CLP session.                                                                                
ipmcget   :       Used to get BMC runtime status.                                                                                   
ipmcset   :       Used to set BMC runtime status or send control command.                                                           
notimeout :       Used to set no timeout limit to login shell.                                                                      
maint_debug_cli : Used to maintance in debug mode.                                                                                  
ping      :       Used to test IPv4 network status.                                                                                 
ping6     :       Used to test IPv6 network status.                                                                                 
ifconfig  :       Used to check network device information.                                                                         
ps        :       Used to check processes status.                                                                                   
free      :       Used to check memory status.                                                                                      
top       :       Used to check system resource used information. None parameter is allowed                                         
df        :       Used to check disk used information.                                                                              
route     :       Used to check route information. None parameter is allowed                                                        
netstat   :       Used to check network port status.  
The maint_debug_cli command is mainly used to locate faults onsite and can be used by administrators and operators only. For details about how to use the command, see the Huawei Server iBMC Advanced Command Reference.

# View the method of using the ping command.

iBMC:/->ping --help                                                             
BusyBox v1.18.4 (2014-08-09 16:28:25 CST) multi-call binary.

Usage: ping [OPTIONS] HOST

Send ICMP ECHO_REQUEST packets to network hosts

	-4,-6		Force IP or IPv6 name resolution
	-c CNT		Send only CNT pings
	-s SIZE		Send SIZE data bytes in packets (default:56)
	-I IFACE/IP	Use interface or IP address as source
	-W SEC		Seconds to wait for the first response (default:10)
			(after all -c CNT packets are sent)
	-w SEC		Seconds until ping exits (default:infinite)
			(can exit earlier with -c CNT)
	-q		Quiet, only displays output at start
			and when finished 
Updated: 2019-11-19

Document ID: EDOC1000157052

Views: 152984

Downloads: 287

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next