No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Method for Obtaining NTP Information (ntp -d mode)

Setting the Method for Obtaining NTP Information (ntp -d mode)


The ntp -d mode command is used to set how to obtain NTP information.


ipmcset -t ntp -d mode -v mode





mode Indicates how to obtain NTP information.
  • manual: Manually set NTP information.
  • dhcpv4: Automatically obtain NTP information using DHCPv4.
  • dhcpv6: Automatically obtain NTP information using DHCPv6.

Usage Guidelines

If mode is DHCPv4, you do not need to set the time zone data.


# Enable NTP information to be manually set.

iBMC:/->ipmcset -t ntp -d mode -v manual
Set NTP mode (manual) successfully.

# Query NTP information.

iBMC:/->ipmcget -d ntpinfo
Status : enabled
Mode               : manual
Preferred Server   :
Alternative Server :
Synchronize        : successful
Auth Enable        : disabled
Group Key          : not imported
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 132682

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next