No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Downloading the Systemcom Data (systemcom)

Downloading the Systemcom Data (systemcom)


The systemcom command is used to download the serial over LAN (SOL) file.


ipmcget -d systemcom



Usage Guidelines

Switch modules do not support this command.

Before running this command, ensure that Serial Port Data is set to on the Diagnosis > Serial Port Data page of the iBMC WebUI.

To view the Systemcom data, use a file transfer tool that supports SFTP, for example WinSCP, to transfer the serial port data (for example systemcom.tar) from the /tmp directory to the local PC.


# Download the SOL file.

iBMC:/->ipmcget -d systemcom
Download System Com data to /tmp/systemcom.tar successfully.
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 132866

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next