No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 20

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting NTP Server Authentication (ntp -d authstatus)

Setting NTP Server Authentication (ntp -d authstatus)


The ntp -d authstatus command is used to set the NTP server authentication status.

  • If authentication is enabled, an authentication is performed before communication between the iBMC and the NTP server.
  • If authentication is disabled, no authentication is required before communication between the iBMC and the NTP server.


ipmcset -t ntp -d authstatus -v status





status Indicates whether an authentication is required.
  • enabled
  • disabled

Usage Guidelines

If authentication is enabled, you must upload the group key to the iBMC.


# Enable authentication for NTP servers.

iBMC:/->ipmcset -t ntp -d authstatus -v enabled
Set NTP enable status (enabled) successfully.

# Query NTP information.

iBMC:/->ipmcget -d ntpinfo
Status             : enabled
Mode               : manual
Preferred Server   :
Alternative Server : fc00::1234
Synchronize        : successful
Auth Enable        : enabled
Group Key          : not imported
Updated: 2019-11-19

Document ID: EDOC1000157052

Views: 153049

Downloads: 287

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next