No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (V250 to V259) User Guide 19

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the SNMP Trap Mode (trap -d mode)

Querying and Setting the SNMP Trap Mode (trap -d mode)


The trap -d mode command enables you to query and set the SNMP trap mode.


ipmcget -t trap -d mode

ipmcset -t trap -d mode -v <option>






Indicates the SNMP trap mode.

  • 0 indicates the SNMP trap mode is Event Code.
  • 1 indicates the SNMP trap mode is OID.
  • 2 indicates the SNMP trap mode is Precise Alarm (recommended).

Usage Guidelines

The switch module does not support the command.

Precise Alarm (recommended) provides more accurate information than OID and Event Code. For details, see Huawei Server iBMC Intelligent Management System SNMP API Description.


# Set the SNMP trap mode to Event Code.

iBMC:/->ipmcset -t trap -d mode -v 0
Set trap mode Event Code success.

# Query the current SNMP trap mode.

iBMC:/->ipmcget -t trap -d mode
Trap mode: Event Code
Updated: 2019-08-01

Document ID: EDOC1000157052

Views: 134276

Downloads: 259

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next